[PSUBS-MAILIST] Parker Pressure Regulator

[Cliff Redus via Personal_Submersibles]

 Alan, the version of the pressure reducing - pressure relieving regulator I used on the R300 until recently was Watts Fluidair (Parker subsidiary )Model R364-02BSS/M1.  It has a 0-60 psi range and a 300 psig max pressure.
Cliff
    On Tuesday, October 15, 2019, 12:14:56 AM CDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Cliff & Alec,
I have just been playing around with my Parker miniature regulator.
As Alec noted there is quite a bit of pressure difference between the set
pressure & the relieving pressure. I have been turning the pressure up
to 20psi & then turning it down, & it takes a lot of turns to bring the pressure
down again. Ie. 1 full turn to go to 20psi but 2 full turns to drop pressure
back to zero.
I am using a cheaper Aluminium version for experimentation & bought the 
0-125 psi range, which In hindsight was a mistake as I am not getting the 
sensitivity I need.
What range did you guys buy. I see you can get 0-25 psi.
I am running my thruster full of silicone oil & just a few inches of air in the feeder
tube from the regulator. 
Alan
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20191015/4e174d97/attachment.html>