[PSUBS-MAILIST] minn-Kota

[James Frankland via Personal_Submersibles]

Rick.  I had this exact same problem.  After a lot of fiddling I now use
solid core wire from the spade terminals.  You can then bend it to stay
clear of the rotating parts.  It’s still awkward to put together but it
does work.
Regards
James

On Wednesday, 10 August 2022, Rick Patton via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Thanks Alan, I have some and was thinking that that would be my only
> option but wanted to double check with the gang. No matter what I put on
> that area, if it rubs again it's going to go pretty much anything I put on
> it. I am using the 90 degree spade clips like the factory did but just
> wish the guys who designed it would of designed it a little differently.
> Hindsight!
>
> Rick
>
> On Tue, Aug 9, 2022 at 1:51 PM Alan James via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> Rick,
>> There are various versions of liquid tape you could brush on to any
>> exposed wires. Apply a number of thinner coats rather than one thick coat.
>> Alan
>>
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Wed, 10 Aug 2022 at 7:56 am, Rick Patton via Personal_Submersibles
>> <personal_submersibles at psubs.org> wrote:
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20220810/5b7b819f/attachment.html>