[PSUBS-MAILIST] Battery pod

[Rick Patton via Personal_Submersibles]

Thanks for all your help and ideas. I have a call out to a company in
Arizona called Battery guys so hopefully they will be able to set me up
with an AGM battery that will be a bit shorter to be able to pass by the
all thread.
Rick

On Wed, Mar 31, 2021 at 1:24 AM Steve McQueen via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Rick, another thing I notice is that the posts/wingnuts of the battery
> terminals seem awful close to the top of the pod. If these were to touch
> the pod it would be an issue. I found things bounce around more than I
> would have guessed when trailering. Maybe another reason to look for a
> shorter battery form?
>
> I am not sure how many amp hours your design needs. Most of us design for
> the max we can fit but in reality you might be able to get away with less.
>
> Good luck!
>
> Steve
>
> On Tue, Mar 30, 2021 at 7:10 PM Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> Here’s a couple of views of what I have. Hope this helps.
>> Rick
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Sent from my iPhone_______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20210331/2790a2db/attachment.html>