[PSUBS-MAILIST] (no subject)

[David Colombo via Personal_Submersibles]

Brian, what motors are you running at 48v?
David

On Sat, Mar 7, 2020, 4:26 PM Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> There are some times when 110 vac could be needed, like computer stuff.
>  Just a thought, we can have an open mind on the subject !
>
>
>   Right now I'm running my motors to see how long they'll go.  It's a kind
> of cool rainy day so the temperature is close to what the ocean would be .
>  I've got the oil expansion tube going into a bucket so I can get an idea
> how large of a reservoir I will need to take care of the expansion.  I
> think I'm going to opt for just a reservoir on the motor side and then I'm
> running a hose up high and then back down to take care of the compression
> up the tube for when I submerge.  Since most of the compression of air will
> occur in the first 30' the water should never get high enough ( in the
> tube) to go over the hump and get into the motor compartment.   So the
> whole system will be open .    I'm also monitoring Voltage ,  Amp draw, and
> ,  Watts     48 volts       21 amps       1030  watts    - two motors
> running  .
>
>
>
> Brian
>
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] (no subject)
> Date: Sun, 8 Mar 2020 00:06:47 +0000 (UTC)
>
> Why complicate a simple solution?  this works great!  Bad Brian!
>
> Hank
>
> On Saturday, March 7, 2020, 4:59:49 PM MST, Brian Cox via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> There are a lot of 110AC led's out there , it would be a simple matter to
> run a DC inverter to make 110ac voltage ,  I wonder if there would be any
> advantage to that,  there might be some better quality led's that are made
> for AC voltage, Any thoughts on that?
>
> Brian
>
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] (no subject)
> Date: Sat, 7 Mar 2020 16:30:26 +0000 (UTC)
>
>                             15:13 Now playing Watch later Watch later Add
> to queue Add to queue
> <https://www.youtube.com/watch?v=dHDUilUO6P8>
>
> How To Make An Underwater Submarine LED Light Bar
>
> In this video I am converting an everyday LED light bar into the deep
> diving, oil filled, underwater light bar t...
> <https://www.youtube.com/watch?v=dHDUilUO6P8>
>
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200307/907b126d/attachment.html>