[PSUBS-MAILIST] (no subject)

[Alan via Personal_Submersibles]

Brian,
I take it that there is no load on the motor!
That seems a high power consumption, 500 Watts per motor.
Have you got the specs for those motors? Have you checked them individually?
Alan

> On 8/03/2020, at 1:26 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> There are some times when 110 vac could be needed, like computer stuff.   Just a thought, we can have an open mind on the subject !  
> 
> 
>   Right now I'm running my motors to see how long they'll go.  It's a kind of cool rainy day so the temperature is close to what the ocean would be .   I've got the oil expansion tube going into a bucket so I can get an idea how large of a reservoir I will need to take care of the expansion.  I think I'm going to opt for just a reservoir on the motor side and then I'm running a hose up high and then back down to take care of the compression up the tube for when I submerge.  Since most of the compression of air will occur in the first 30' the water should never get high enough ( in the tube) to go over the hump and get into the motor compartment.   So the whole system will be open .    I'm also monitoring Voltage ,  Amp draw, and ,  Watts     48 volts       21 amps       1030  watts    - two motors running  .
> 
>   
> 
> Brian
>     
> 
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] (no subject)
> Date: Sun, 8 Mar 2020 00:06:47 +0000 (UTC)
> 
> Why complicate a simple solution?  this works great!  Bad Brian!
> 
> Hank
> 
> On Saturday, March 7, 2020, 4:59:49 PM MST, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> There are a lot of 110AC led's out there , it would be a simple matter to run a DC inverter to make 110ac voltage ,  I wonder if there would be any advantage to that,  there might be some better quality led's that are made for AC voltage, Any thoughts on that?
> 
> Brian
> 
> 
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] (no subject)
> Date: Sat, 7 Mar 2020 16:30:26 +0000 (UTC)
> 
>                             15:13 Now playing Watch later Watch later Add to queue Add to queue                
> 
> 	
> How To Make An Underwater Submarine LED Light Bar
> In this video I am converting an everyday LED light bar into the deep diving, oil filled, underwater light bar t...
> 
> 
> 
> _______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200308/05916f05/attachment.html>