[PSUBS-MAILIST] (no subject)

Alan via Personal_Submersibles personal_submersibles at psubs.org
Fri Jul 24 17:12:08 EDT 2020


Hank,
how are you going to get it off? You said you were forgetting the A frame idea.
Maybe you could have turned the back of the boat in to a couple of large
ballast tanks & tipped the whole boat.
Alan

> On 25/07/2020, at 7:33 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan, thanks.  I am still working out the loading part.  I am now thinking a ramp that tools out then tips way down into the water.  
> It will have tie down anchors welded on yet.
> Hank
> 
> On Friday, July 24, 2020, 1:21:27 PM MDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Great Hank,
> the boat is bigger than I thought.
> Are you going to weld any guides to the floor? Angled guides to bring it 
> central when winching in & guides either side to stop it sliding sideways.
> Alan
> 
> > On 25/07/2020, at 6:29 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> > 
> > Sub fits just nice on the deck
> > Hank
> > 
> > <IMG_2500.JPG>
> > 
> > 
> > Sent from my iPhone
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200725/2aa26116/attachment.html>


More information about the Personal_Submersibles mailing list