[PSUBS-MAILIST] SEMjr - DIY Electronic Project

[Jon Wallace via Personal_Submersibles]

 Ok, not really blowing on them.
In this case Alan, I will simply drill a bunch of small holes into the enclosure to allow air circulation.  I wasn't able to find a small enough ventilated enclosure that made sense.  This one happened to be perfect size for the PCB.
Jon

    On Friday, December 4, 2020, 01:35:26 PM EST, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
  Looks great Jon. How are you getting the air to flow across them in the enclosure? Alan

   
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20201204/a710d3b7/attachment.html>