[PSUBS-MAILIST] Oil leak

[Sean T. Stevenson via Personal_Submersibles]

What is the tube size and material, and nature of the mating nozzle?

Sean
-------- Original Message --------
On Apr. 10, 2020, 15:52, Alan via Personal_Submersibles wrote:

> Moved my motor last night & found silicone oil had come out
> through my hose attachment.
> I am using a 5 cst silicone so hard to contain. It's a little bit like a penetrating oil.
> From the photo you can see I used an undersized tube to give a really tight
> fit on the thruster nozzle & used a crimp fitting which I thought would be more
> substantial than a hose clamp.
> Wondering if I should have gone for a larger tube & wrapped the nozzle with
> sealing tape, or covered the nozzle with some sort of sealing compound before
> attaching the hose. Or possibly go for a threaded nozzle & use a hydraulic hose.
> Another idea I'm thinking of is to put an additional hose clamp on it but put a heat
> Gun on the tube prior to tightening to get the tube soft to mold in to any recesses.
> Any thoughts or alternative suggestions?
> Alan
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200410/5aa6bdec/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 1085730 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200410/5aa6bdec/attachment-0001.jpe>