Hugh, hopefully that won't be problematic in that good practice is to have a short run of wire from the battery to the controller & longer run from the controller to the motor you may be aware of this....<br>Why Short Battery Wires are Preferred:<br>Long battery wires can increase inductance, which can lead to voltage spikes and damage to the controller's sensitive components. These spikes can be particularly problematic in high-power, fast-switching systems like RC controllers (ESCs). <br>This can be mitigated by adding capacitors  between the wires. <br>Cheers Alan<br><br><div id="ymail_android_signature"><a id="ymail_android_signature_link" href="https://mail.onelink.me/107872968?pid=nativeplacement&c=US_Acquisition_YMktg_315_SearchOrgConquer_EmailSignature&af_sub1=Acquisition&af_sub2=US_YMktg&af_sub3=&af_sub4=100002039&af_sub5=C01_Email_Static_&af_ios_store_cpp=0c38e4b0-a27e-40f9-a211-f4e2de32ab91&af_android_url=https://play.google.com/store/apps/details?id=com.yahoo.mobile.client.android.mail&listing=search_organize_conquer">Yahoo Mail: Search, organise, conquer</a></div> <br> <blockquote style="margin: 0 0 20px 0;"> <div style="font-family:Roboto, sans-serif; color:#6D00F6;"> <div>On Fri, 2 May 2025 at 11:10 am, via Personal_Submersibles</div><div><personal_submersibles@psubs.org> wrote:</div> </div> <div style="padding: 10px 0 0 20px; margin: 10px 0 0 0; border-left: 1px solid #6D00F6;"> <div dir='ltr'>Hi all,  For that very reason I have made a housing attached to the motor<br></div><div dir='ltr'>with the controller and canbus interface all within.  I used a Kelly<br></div><div dir='ltr'>controller and the housing for all the components is about 100 mm diameter<br></div><div dir='ltr'>and about 50mm deep.  So I have my 72 volt power cord and a CANbus cable<br></div><div dir='ltr'>into the housing.  Hopefully no noise with my OTS.  All 11 motors configured<br></div><div dir='ltr'>in the same way.  Hugh<br></div><div dir='ltr'><br></div><div dir='ltr'>-----Original Message-----Si about 100 mm diameter and about 50mm deep<br></div><div dir='ltr'>From: Personal_Submersibles <<a ymailto="mailto:personal_submersibles-bounces@psubs.org" href="mailto:personal_submersibles-bounces@psubs.org">personal_submersibles-bounces@psubs.org</a>> On<br></div><div dir='ltr'>Behalf Of via Personal_Submersibles<br></div><div dir='ltr'>Sent: Wednesday, 30 April 2025 1:40 PM<br></div><div dir='ltr'>To: <a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a><br></div><div dir='ltr'>Subject: Personal_Submersibles Digest, Vol 136, Issue 33<br></div><div dir='ltr'><br></div><div dir='ltr'>Send Personal_Submersibles mailing list submissions to<br></div><div dir='ltr'>    <a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a><br></div><div dir='ltr'><br></div><div dir='ltr'>To subscribe or unsubscribe via the World Wide Web, visit<br></div><div dir='ltr'>    <a href="http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'>or, via email, send a message with subject or body 'help' to<br></div><div dir='ltr'>    <a ymailto="mailto:personal_submersibles-request@psubs.org" href="mailto:personal_submersibles-request@psubs.org">personal_submersibles-request@psubs.org</a><br></div><div dir='ltr'><br></div><div dir='ltr'>You can reach the person managing the list at<br></div><div dir='ltr'>    <a ymailto="mailto:personal_submersibles-owner@psubs.org" href="mailto:personal_submersibles-owner@psubs.org">personal_submersibles-owner@psubs.org</a><br></div><div dir='ltr'><br></div><div dir='ltr'>When replying, please edit your Subject line so it is more specific than<br></div><div dir='ltr'>"Re: Contents of Personal_Submersibles digest..."<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>Today's Topics:<br></div><div dir='ltr'><br></div><div dir='ltr'>   1. Re: OTS and motor controller noise<br></div><div dir='ltr'>      (Jon Wallace via Personal_Submersibles)<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>----------------------------------------------------------------------<br></div><div dir='ltr'><br></div><div dir='ltr'>Message: 1<br></div><div dir='ltr'>Date: Wed, 30 Apr 2025 01:39:18 +0000 (UTC)<br></div><div dir='ltr'>From: Jon Wallace via Personal_Submersibles<br></div><div dir='ltr'>    <<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>><br></div><div dir='ltr'>To: Personal Submersibles General Discussion<br></div><div dir='ltr'>    <<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>><br></div><div dir='ltr'>Subject: Re: [PSUBS-MAILIST] OTS and motor controller noise<br></div><div dir='ltr'>Message-ID: <<a ymailto="mailto:90593753.3387481.1745977158206@mail.yahoo.com" href="mailto:90593753.3387481.1745977158206@mail.yahoo.com">90593753.3387481.1745977158206@mail.yahoo.com</a>><br></div><div dir='ltr'>Content-Type: text/plain; charset="utf-8"<br></div><div dir='ltr'><br></div><div dir='ltr'> Lol, just saw your comment about the Theremin.? So maybe we can give a<br></div><div dir='ltr'>rendition of the 1812 Overture from 100 feet??? ?:)? :) Jon<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>    On Tuesday, April 29, 2025 at 08:31:52 PM EDT, Alec Smyth via<br></div><div dir='ltr'>Personal_Submersibles <<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:  <br></div><div dir='ltr'> <br></div><div dir='ltr'> Just finished another round of experimentation. This is fun.<br></div><div dir='ltr'>1) Changing channels did absolutely nothing at all. All four were<br></div><div dir='ltr'>equally?noisy.2) Turning on squelch was the opposite, it was so effective it<br></div><div dir='ltr'>completely eliminated the noise. There was not even minimal white noise and<br></div><div dir='ltr'>I wondered if the comms box was still on. However, I do not expect it to<br></div><div dir='ltr'>work that well in the water. I know I've tried it on dives and it was?an<br></div><div dir='ltr'>improvement, but not to this extent. My guess is that it's because with the<br></div><div dir='ltr'>props spinning in air, thruster currents are drastically lower.3) Shielding<br></div><div dir='ltr'>with aluminum foil was super interesting. I could hear the attenuation go up<br></div><div dir='ltr'>and down just as I held a sheet of foil in my hand and moved it in and out<br></div><div dir='ltr'>of the space between one of the controllers and the comms box. D'you guys<br></div><div dir='ltr'>know what a Theremin is? Wrapping the OTS box in foil certainly did help<br></div><div dir='ltr'>attenuate the noise, but isn't a complete solution because of small gaps<br></div><div dir='ltr'>remaining, for instance for the cables. I'd say the noise reduction was<br></div><div dir='ltr'>probably 50-75%.<br></div><div dir='ltr'>Conclusion... I'll plan to both relocate the OTS box to the quietest area,<br></div><div dir='ltr'>and use squelch. Maybe get fancy by making an aluminum pocket into which<br></div><div dir='ltr'>I'll slide the SSB-2010, as a method of mounting it to the hull.?<br></div><div dir='ltr'>Alec<br></div><div dir='ltr'><br></div><div dir='ltr'>On Tue, Apr 29, 2025 at 4:46?PM Jon Wallace via Personal_Submersibles<br></div><div dir='ltr'><<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'> Alec, can you also test channel 3.? I'm literally getting no interference<br></div><div dir='ltr'>on Channel 3 which is 31.25khz upper side band.? Using this channel would be<br></div><div dir='ltr'>a good work around until an electronic fix can be achieved that protects all<br></div><div dir='ltr'>channels.<br></div><div dir='ltr'>Jon<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>    On Tuesday, April 29, 2025 at 01:01:03 PM EDT, Alec Smyth via<br></div><div dir='ltr'>Personal_Submersibles <<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:  <br></div><div dir='ltr'> <br></div><div dir='ltr'> I happen to have my former sub Snoopy back in the shop because her current<br></div><div dir='ltr'>owner has engaged me to recommission her. The job is about 99% done, and the<br></div><div dir='ltr'>comms already installed, so I just conducted an experiment. I have the same<br></div><div dir='ltr'>setup as Dave; SSB-2010 inside the cabin running on its own dry cell<br></div><div dir='ltr'>batteries, connected to the transducer by a cable that is potted through a<br></div><div dir='ltr'>penetrator without cutting. I had left that cable longer than needed, in<br></div><div dir='ltr'>case the owner decided he wanted the OTS unit somewhere different.?<br></div><div dir='ltr'>I turned on the thrusters and started moving the OTS all around inside, and<br></div><div dir='ltr'>also routing the cable along different paths. Here are the conclusions:<br></div><div dir='ltr'>1) As one would expect, there is much less noise when the thrusters are at<br></div><div dir='ltr'>either zero throttle or full throttle. All the noise is in between, when the<br></div><div dir='ltr'>signal is choppy.2) The noise is completely insensitive to the position of<br></div><div dir='ltr'>the cable. BTW the cable I'm using?was the OEM cable on another comms system<br></div><div dir='ltr'>similar to OTS. It's a small diameter shielded single conductor, where the<br></div><div dir='ltr'>shield is not grounded but used as a second conductor.3) Almost all of the<br></div><div dir='ltr'>variation in noise comes from proximity of the OTS unit to the speed<br></div><div dir='ltr'>controllers. There is also a bit of noise if its placed close to the battery<br></div><div dir='ltr'>cables, but it's nothing compared to the noise emanating from the<br></div><div dir='ltr'>controllers.<br></div><div dir='ltr'>So... the conclusion, at least in my case, is to place the OTS unit as far<br></div><div dir='ltr'>from the speed controllers and battery cables as possible. David, does that<br></div><div dir='ltr'>match the location of your OTS unit?<br></div><div dir='ltr'>Best,Alec<br></div><div dir='ltr'>On Tue, Apr 29, 2025 at 12:54?AM David Colombo via Personal_Submersibles<br></div><div dir='ltr'><<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>Jon, youve got me thinking on this one. In the VAST, i have the diver unit<br></div><div dir='ltr'>inside the sub, a continuous non cut cable potted to the thru hull<br></div><div dir='ltr'>penetrator. The diver unit has its own 6 AA battery pack. With the pair of<br></div><div dir='ltr'>36v 101's, and wearing the headset, i have not had any issues with bleed<br></div><div dir='ltr'>over noise. I am planning on adding the topside unit inside as a new comms<br></div><div dir='ltr'>like you. My 101's are controlled by their own minnkota pwm which are on the<br></div><div dir='ltr'>36v lipo4 battery pack.? The hotel loads are on their own 12v lipo4 battery<br></div><div dir='ltr'>pack, which is where i plan on connecting the topside unit.? I will run a<br></div><div dir='ltr'>test to see if i can find any signal interferance using the hotel load<br></div><div dir='ltr'>battery vs its own 2-6v battery pack, and let you know what i find.<br></div><div dir='ltr'><br></div><div dir='ltr'>On Mon, Apr 28, 2025, 4:24?PM Alec Smyth via Personal_Submersibles<br></div><div dir='ltr'><<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'>I've had mine to 250', but it was inside the sub. That said, the effect on<br></div><div dir='ltr'>the audio quality was remarkable. It was perfectly clear, but if you ever<br></div><div dir='ltr'>talked to your friends through a long garden hose as a kid, that was exactly<br></div><div dir='ltr'>how it sounded. Which was great, because it made it feel spooky and deep!<br></div><div dir='ltr'>On Mon, Apr 28, 2025 at 4:35?PM Sean T. Stevenson via Personal_Submersibles<br></div><div dir='ltr'><<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>I have had a SSB-2010 a bit deeper than 130 as a diver without flooding the<br></div><div dir='ltr'>housing, but I don't know how deep it will go without compensation.? That<br></div><div dir='ltr'>limit is the standard recreational diving depth limit for<br></div><div dir='ltr'>no-mandatory-decompression-stop diving, and it is likely that it was both<br></div><div dir='ltr'>designed and rated accordingly.?? These units have no helium speech<br></div><div dir='ltr'>descramblers, so they are of limited utility for ambient pressure divers as<br></div><div dir='ltr'>you go deeper. The donald duck voice on top of the limited bandwidth of<br></div><div dir='ltr'>ultrasonic comms at all makes intelligibility a challenge.<br></div><div dir='ltr'><br></div><div dir='ltr'>I had the unit to ~165 fsw, and I suspect that you could push it deeper, but<br></div><div dir='ltr'>you would void any warranty.? I'm using PowerCom 3000D units now, and these<br></div><div dir='ltr'>have similar depth ratings.<br></div><div dir='ltr'><br></div><div dir='ltr'>Sean<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>-------- Original Message --------<br></div><div dir='ltr'>On 2025-04-28 10:59, Jon Wallace via Personal_Submersibles  wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'> SB-2010 is rated to 130 feet by OTS.? Has anyone tested one to deeper<br></div><div dir='ltr'>depths?<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>    On Monday, April 28, 2025 at 01:15:01 PM EDT, hank pronk via<br></div><div dir='ltr'>Personal_Submersibles <<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:  <br></div><div dir='ltr'> <br></div><div dir='ltr'> Jon, put the whole unit outside the hull.? I have zero issues with this.? I<br></div><div dir='ltr'>just put fresh batteries in for each diveHank Sent from my iPhone<br></div><div dir='ltr'><br></div><div dir='ltr'>On Apr 28, 2025, at 10:16?AM, Jon Wallace via Personal_Submersibles<br></div><div dir='ltr'><<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>? Not a lot of room to work with of course inside the cabin.? My controllers<br></div><div dir='ltr'>are mounted up near the top of the hull, the coax comes in from the bottom<br></div><div dir='ltr'>and is probably only about 18 inches laterally from the controllers.? The<br></div><div dir='ltr'>coax cable thru-hull is only 5/8 inch diameter (15.8 mm) so PL259's won't<br></div><div dir='ltr'>fit through it to allow me removal for maintenance which is why I opted for<br></div><div dir='ltr'>SMA.? I suppose I could try it since I won't be removing the cable regularly<br></div><div dir='ltr'>but it's definitely going to be a PIA change.<br></div><div dir='ltr'>No I'm not sure whether the noise is electrical or acoustic in source but<br></div><div dir='ltr'>now that you've asked I can tell you that the controllers make an audible<br></div><div dir='ltr'>tone when the PWM is active, even with the OTS off.? The tone changes of<br></div><div dir='ltr'>course depending upon the PWM frequency I select, but it is always there.?<br></div><div dir='ltr'>The same tone comes out the OTS, but amplified.<br></div><div dir='ltr'>Jon<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>    On Monday, April 28, 2025 at 11:51:58 AM EDT, Sean T. Stevenson via<br></div><div dir='ltr'>Personal_Submersibles <<a ymailto="mailto:personal_submersibles@psubs.org" href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:  <br></div><div dir='ltr'> <br></div><div dir='ltr'> <br></div><div dir='ltr'>Two things I would look at:<br></div><div dir='ltr'><br></div><div dir='ltr'>1) Relative location and shielding between the motor controller and the<br></div><div dir='ltr'>transducer cable.? Is additional shielding (conduit?) possible?<br></div><div dir='ltr'><br></div><div dir='ltr'>2) I have encountered problems in the past with noise on coax due to<br></div><div dir='ltr'>impedance mismatch / partial signal reflection at any connectors. In my<br></div><div dir='ltr'>experience, this is solved by moving from RG58 up to RG8, but you don't have<br></div><div dir='ltr'>that option because the transducer is a potted assembly. If you have enough<br></div><div dir='ltr'>cable tail available to experiment, I wonder about swapping the SMA<br></div><div dir='ltr'>connectors for PL259 to see if that makes a difference.<br></div><div dir='ltr'><br></div><div dir='ltr'>Are you certain that the noise you are hearing is being introduced<br></div><div dir='ltr'>electrically, and not acoustically in the ultrasonic range of the<br></div><div dir='ltr'>transducer?<br></div><div dir='ltr'><br></div><div dir='ltr'>Sean<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>-------- Original Message --------<br></div><div dir='ltr'>On 2025-04-28 06:47, Jon Wallace via Personal_Submersibles wrote:<br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>Hey folks,<br></div><div dir='ltr'>My OTS STX-101 receiver is picking up some fairly significant and annoying<br></div><div dir='ltr'>electronic noise from my Roboteq PWM motor controllers.? I tried changing<br></div><div dir='ltr'>channels on the OTS hoping a different frequency might help but it didn't.?<br></div><div dir='ltr'>I also tried changing the controller PWM frequency between a range of 10khz<br></div><div dir='ltr'>and 24khz but nothing between those frequencies made a significant<br></div><div dir='ltr'>improvement.? The noise is enough to override the normal squelch setting but<br></div><div dir='ltr'>at the same time a strong communication signal through the OTS transducer is<br></div><div dir='ltr'>enough to override the noise.<br></div><div dir='ltr'>My configuration has the transducer outside the hull and receiver inside the<br></div><div dir='ltr'>hull which required cutting the cable.? I potted the cable in a thru-hull<br></div><div dir='ltr'>and reconnected the cable inside the cabin with RG-58 SMA connectors<br></div><div dir='ltr'>(soldered, not crimped).<br></div><div dir='ltr'>In talking with a couple other folks it seems I am not alone in this<br></div><div dir='ltr'>experience.? Some others have found that using local batteries instead of<br></div><div dir='ltr'>tying into the same batteries used by the motors has significantly reduced<br></div><div dir='ltr'>the noise, however in my case I am already using a separate battery isolated<br></div><div dir='ltr'>from the motor batteries.? Another choice that has seemed to make a<br></div><div dir='ltr'>difference is mounting an SB-1001 outside the hull and running the headset<br></div><div dir='ltr'>wires through the hull instead.<br></div><div dir='ltr'>Anyone else have similar experiences with OTS?<br></div><div dir='ltr'>Jon<br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'>  _______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'>  <br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'>  _______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'>  <br></div><div dir='ltr'>-------------- next part --------------<br></div><div dir='ltr'>An HTML attachment was scrubbed...<br></div><div dir='ltr'>URL:<br></div><div dir='ltr'><<a href="http://www.whoweb.com/pipermail/personal_submersibles/attachments/20250430/" target=_blank>http://www.whoweb.com/pipermail/personal_submersibles/attachments/20250430/</a><br></div><div dir='ltr'>44d4bef4/attachment.html><br></div><div dir='ltr'><br></div><div dir='ltr'>------------------------------<br></div><div dir='ltr'><br></div><div dir='ltr'>Subject: Digest Footer<br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles</a><br></div><div dir='ltr'><br></div><div dir='ltr'><br></div><div dir='ltr'>------------------------------<br></div><div dir='ltr'><br></div><div dir='ltr'>End of Personal_Submersibles Digest, Vol 136, Issue 33<br></div><div dir='ltr'>******************************************************<br></div><div dir='ltr'><br></div><div dir='ltr'>_______________________________________________<br></div><div dir='ltr'>Personal_Submersibles mailing list<br></div><div dir='ltr'><a ymailto="mailto:Personal_Submersibles@psubs.org" href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br></div><div dir='ltr'><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div> </div> </blockquote>