<div dir="ltr">I've had mine to 250', but it was inside the sub. That said, the effect on the audio quality was remarkable. It was perfectly clear, but if you ever talked to your friends through a long garden hose as a kid, that was exactly how it sounded. Which was great, because it made it feel spooky and deep!</div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Mon, Apr 28, 2025 at 4:35 PM Sean T. Stevenson via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><p dir="ltr">I have had a SSB-2010 a bit deeper than 130 as a diver without flooding the housing, but I don't know how deep it will go without compensation. That limit is the standard recreational diving depth limit for no-mandatory-decompression-stop diving, and it is likely that it was both designed and rated accordingly. These units have no helium speech descramblers, so they are of limited utility for ambient pressure divers as you go deeper. The donald duck voice on top of the limited bandwidth of ultrasonic comms at all makes intelligibility a challenge.</p>
<p dir="ltr">I had the unit to ~165 fsw, and I suspect that you could push it deeper, but you would void any warranty. I'm using PowerCom 3000D units now, and these have similar depth ratings.</p>
<p dir="ltr">Sean<br>
</p>
<div><br><br>-------- Original Message --------<br>On 2025-04-28 10:59, Jon Wallace via Personal_Submersibles <u></u> wrote:<br><blockquote><div><div style="font-family:"times new roman","new york",times,serif;font-size:16px"><div></div>
<div dir="ltr">SB-2010 is rated to 130 feet by OTS. Has anyone tested one to deeper depths?</div><div dir="ltr"><br></div><div dir="ltr"><br></div><div><br></div>
</div><div id="m_-9094207129605238190ydpb024030yahoo_quoted_6355923448">
<div style="font-family:"Helvetica Neue",Helvetica,Arial,sans-serif;font-size:13px;color:rgb(38,40,42)">
<div>
On Monday, April 28, 2025 at 01:15:01 PM EDT, hank pronk via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:
</div>
<div><br></div>
<div><br></div>
<div><div id="m_-9094207129605238190ydpb024030yiv0224845325"><div>Jon, put the whole unit outside the hull. I have zero issues with this. I just put fresh batteries in for each dive<div>Hank<br clear="none" id="m_-9094207129605238190ydpb024030yiv0224845325lineBreakAtBeginningOfSignature"><div dir="ltr">Sent from my iPhone</div><div dir="ltr"><div id="m_-9094207129605238190ydpb024030yiv0224845325yqtfd20479"><br clear="none"><blockquote type="cite">On Apr 28, 2025, at 10:16 AM, Jon Wallace via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:<br clear="none"><br clear="none"></blockquote></div></div><div id="m_-9094207129605238190ydpb024030yiv0224845325yqtfd22505"><blockquote type="cite"><div dir="ltr"><div style="font-family:"times new roman","new york",times,serif;font-size:16px"><div></div>
<div dir="ltr">Not a lot of room to work with of course inside the cabin. My controllers are mounted up near the top of the hull, the coax comes in from the bottom and is probably only about 18 inches laterally from the controllers. The coax cable thru-hull is only 5/8 inch diameter (15.8 mm) so PL259's won't fit through it to allow me removal for maintenance which is why I opted for SMA. I suppose I could try it since I won't be removing the cable regularly but it's definitely going to be a PIA change.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">No I'm not sure whether the noise is electrical or acoustic in source but now that you've asked I can tell you that the controllers make an audible tone when the PWM is active, even with the OTS off. The tone changes of course depending upon the PWM frequency I select, but it is always there. The same tone comes out the OTS, but amplified.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">Jon</div><div dir="ltr"><br clear="none"></div><div dir="ltr"><br clear="none"></div><div><br clear="none"></div>
</div><div id="m_-9094207129605238190ydpb024030yiv0224845325ydp932b41f7yahoo_quoted_6310195705">
<div style="font-family:"Helvetica Neue",Helvetica,Arial,sans-serif;font-size:13px;color:rgb(38,40,42)">
<div>
On Monday, April 28, 2025 at 11:51:58 AM EDT, Sean T. Stevenson via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:
</div>
<div><br clear="none"></div>
<div><br clear="none"></div>
<div><div id="m_-9094207129605238190ydpb024030yiv0224845325ydp932b41f7yiv8374342693"><div><p dir="ltr">Two things I would look at:</p>
<p dir="ltr">1) Relative location and shielding between the motor controller and the transducer cable. Is additional shielding (conduit?) possible?</p>
<p dir="ltr">2) I have encountered problems in the past with noise on coax due to impedance mismatch / partial signal reflection at any connectors. In my experience, this is solved by moving from RG58 up to RG8, but you don't have that option because the transducer is a potted assembly. If you have enough cable tail available to experiment, I wonder about swapping the SMA connectors for PL259 to see if that makes a difference.</p>
<p dir="ltr">Are you certain that the noise you are hearing is being introduced electrically, and not acoustically in the ultrasonic range of the transducer?</p>
<p dir="ltr">Sean<br clear="none">
</p>
<div id="m_-9094207129605238190ydpb024030yiv0224845325ydp932b41f7yiv8374342693yqt01924"><div><br clear="none"><br clear="none">-------- Original Message --------<br clear="none">On 2025-04-28 06:47, Jon Wallace via Personal_Submersibles wrote:<br clear="none"><blockquote></blockquote><div><div style="font-family:"times new roman","new york",times,serif;font-size:16px"><div dir="ltr">Hey folks,</div><div dir="ltr"><br clear="none"></div><div dir="ltr">My OTS STX-101 receiver is picking up some fairly significant and annoying electronic noise from my Roboteq PWM motor controllers. I tried changing channels on the OTS hoping a different frequency might help but it didn't. I also tried changing the controller PWM frequency between a range of 10khz and 24khz but nothing between those frequencies made a significant improvement. The noise is enough to override the normal squelch setting but at the same time a strong communication signal through the OTS transducer is enough to override the noise.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">My configuration has the transducer outside the hull and receiver inside the hull which required cutting the cable. I potted the cable in a thru-hull and reconnected the cable inside the cabin with RG-58 SMA connectors (soldered, not crimped).</div><div dir="ltr"><br clear="none"></div><div dir="ltr">In talking with a couple other folks it seems I am not alone in this experience. Some others have found that using local batteries instead of tying into the same batteries used by the motors has significantly reduced the noise, however in my case I am already using a separate battery isolated from the motor batteries. Another choice that has seemed to make a difference is mounting an SB-1001 outside the hull and running the headset wires through the hull instead.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">Anyone else have similar experiences with OTS?</div><div dir="ltr"><br clear="none"></div><div dir="ltr">Jon</div><div dir="ltr"><br clear="none"></div></div></div></div></div></div></div><div id="m_-9094207129605238190ydpb024030yiv0224845325ydp932b41f7yqt27155">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a shape="rect" href="mailto:Personal_Submersibles@psubs.org" rel="nofollow" target="_blank">Personal_Submersibles@psubs.org</a><br clear="none"><a shape="rect" href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div></div>
</div>
</div><span>_______________________________________________</span><br clear="none"><span>Personal_Submersibles mailing list</span><br clear="none"><span><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a></span><br clear="none"><span><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a></span><br clear="none"></div></blockquote></div></div></div></div>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" rel="nofollow" target="_blank">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div>
</div>
</div></div></blockquote></div>_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>