<div dir="auto">Hi guys, I've been cutting a lot of foam over the last month,  so I thought I would share the progress. I hope to complete the final foam cutting this weekend.  Next step is to replace the 3/4" plywood ribs with a piece of 3/4" foam. Then glue all foam into a single block and then start the final shaping and sanding before starting the fiberglass process. The final fiberglass will be cast into 5 or 6 pieces depending on the demolding lines. Once those parts are removed from the plug, I will be recutting the foam to cast the inner ballast tank parts.<div dir="auto">The forward canards are coming along right in line with story of the SeaQuestor I am developing for the interaction with children.</div><div dir="auto">Best Regards,</div><div dir="auto">David</div></div>