<div dir="ltr">Can anyone recommend a good dielectric non shrinking epoxy? <div>I attached my battery pods to the hull using 3 pieces of 4" schedule 80 pipe that are about 4" long. only the aft pipe goes threw the wall of the pod and hull and I am using short pieces of 1/2" copper all thread that will protrude about 2" inside the hull and pod that I will put lugs on that will transfer the battery power inside the hull and I will fill the void between pod and hull with an epoxy to seal the two spaces in case of flooding or possible hydrogen explosion.</div><div>Rick  </div></div>