<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div></div><div>Hi Hank,</div><div>not quite following what you are doing.</div><div>How come only one wire needs to disconnect?</div><div>Do you mean the occupancy sphere or the escape pod?</div><div>There are pull apart connectors that have high amps running through them</div><div>that they use in the RC World. If you google 5 or 6mm gold connectors you </div><div>are bound to find them. </div><div>I wonder if it would be better to connect them, & coat them in some sort of</div><div>grease & shrink tube over the connection. This would waterproof them, </div><div>stop stray current & still leave them able to pull apart if there is enough force </div><div>to tear the shrink tubing apart.</div><div>Alan</div><div><br></div><div><br>On 28/12/2018, at 12:09 PM, hank pronk via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br><br></div><blockquote type="cite"><div><div>Hi All, I have to make a 50 amp connector with two pins that will pull apart when the occupant sphere section separates (jettisons) I use flat trailer plug connectors for all the small stuff. I grease them up with silicone grease and it has worked perfectly on Gamma.</div><div>Hank</div><div class="ydp64741c8eyahoo-style-wrap" style="font-family: Helvetica Neue, Helvetica, Arial, sans-serif; font-size: 13px;"></div></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>Personal_Submersibles mailing list</span><br><span><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a></span><br><span><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a></span><br></div></blockquote></body></html>