<div dir="ltr">
<div>Hi Guys, I have a question on sandblasting my hull parts. The 
initial fabrication is almost complete and I was thinking that I might 
want to have the parts sand blasted prior to welding them all together. 
Maybe even a light primer seal coat to slow flash rust as it may be at 
the welders for a couple of weeks. Any thoughts or advice would be 
appreciated. I know right now every time I get near the parts I'm 
covered in black smudges.</div><div><br></div>

<br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Best Regards,<br>David Colombo<br><img src="http://static.squarespace.com/static/533310a9e4b0fba62008a464/t/5339c1f2e4b041bac4e25d1b/1396294132055/?format=500w" width="200" height="110"><br>804 College Ave<br>Santa Rosa, CA. 95404<br>(707) 536-1424<br><a href="http://www.SeaQuestor.com" target="_blank">www.SeaQuestor.com</a><br><br></div></div></div></div>
</div>