<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><BR><BR>--- personal_submersibles@psubs.org wrote:<BR><BR>From: David Colombo via Personal_Submersibles <personal_submersibles@psubs.org><BR>To: Personal Submersibles General Discussion <personal_submersibles@psubs.org><BR>Subject: [PSUBS-MAILIST] Sand Blasting<BR>Date: Tue, 14 Aug 2018 10:19:40 -0700<BR><BR><DIV dir="ltr">
<DIV>Hi Guys, I have a question on sandblasting my hull parts. The 
initial fabrication is almost complete and I was thinking that I might 
want to have the parts sand blasted prior to welding them all together. 
Maybe even a light primer seal coat to slow flash rust as it may be at 
the welders for a couple of weeks. Any thoughts or advice would be 
appreciated. I know right now every time I get near the parts I'm 
covered in black smudges.</DIV><DIV><BR></DIV>

<BR><DIV><DIV><DIV dir="ltr"><DIV>Best Regards,<BR>David Colombo<BR><IMG src="http://static.squarespace.com/static/533310a9e4b0fba62008a464/t/5339c1f2e4b041bac4e25d1b/1396294132055/?format=500w" width="200" height="110"><BR>804 College Ave<BR>Santa Rosa, CA. 95404<BR>(707) 536-1424<BR><A href="http://www.SeaQuestor.com">www.SeaQuestor.com</A><BR><BR></DIV></DIV></DIV></DIV>
</DIV>
_______________________________________________
Personal_Submersibles mailing list
<A href="/eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org">Personal_Submersibles@psubs.org</A>
<A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A>
</DIV>