<html><head></head><body><div style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:13px;"><div>Alan,</div><div>I have just disassembled my new electric actuator and am extremely please with the way it is built. It is very light and operates smoothly. The speed is perfect and about the same as my hydraulic functions on my current arm. Air compensating will be a breeze by drilling into the end cap and threading in a fitting. A second vent hole will have to be drilled in the casing to allow air to move freely between the two halves of the actuator body. I spent about 250 Canadian for one actuator, so a four function arm would be 1,000 dollars. I will put it all together and see how it works but I am confident it will be a big improvement on a hydraulic set up both in cost and weight, not to mention complexity. By adding air compensation, it gives me an excuse to air compensate my vertical thrusters. I will mount a dedicated air tank for this set up.</div><div>Hank</div></div></body></html>