<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Hi Hank,</div><div id="AppleMailSignature">yes. If you have your speed controller on full speed there would be no</div><div id="AppleMailSignature">pulsing of the power to the motor, it would be fully on.</div><div id="AppleMailSignature">You can have full power & no rpm in a stall situation. Most modern</div><div id="AppleMailSignature">controllers I have seen have current limiting that you can program in;</div><div id="AppleMailSignature">so in a stall or overloaded situation it would back off the power.</div><div id="AppleMailSignature">Alan</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature"><br>Sent from my iPad</div><div><br>On 5/10/2017, at 7:56 AM, hank pronk via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br><br></div><blockquote type="cite"><div><div style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:13px;"><div>Hi All,</div><div>When a dc motor is speed controlled with a PWM controller is the motor at full power regardless of rpm?</div><div>Hank</div></div></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>Personal_Submersibles mailing list</span><br><span><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a></span><br><span><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a></span><br></div></blockquote></body></html>