<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV>Of course I'd be using the front and side ports as well ;-)</DIV><DIV> </DIV><DIV>Brian<BR><BR>--- personal_submersibles@psubs.org wrote:<BR><BR>From: "Sean T. Stevenson via Personal_Submersibles" <personal_submersibles@psubs.org><BR>To: Personal Submersibles General Discussion <personal_submersibles@psubs.org><BR>Subject: Re: [PSUBS-MAILIST] 8 window K350 CT<BR>Date: Fri, 14 Jul 2017 09:35:00 -0600<BR><BR></DIV><P dir="ltr">Port and starboard running lights have a prescribed arc of visibility from dead ahead to 22.5° abaft the beam on each side (112.5° each), with the stern light covering the remaining 135° centered about dead astern. To shine a running light through a 45° viewport would entail a maximum 67.5° angle through the window, which might be difficult.</P></DIV>
<P dir="ltr">Sean<BR>
<BR><BR><DIV>On July 14, 2017 8:51:25 AM MDT, Brian Cox via Personal_Submersibles <personal_submersibles@psubs.org> wrote:<BLOCKQUOTE style="margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<PRE>I have 8 in my CT , one added benefit will be that I can put navigation lights on the port and starboard 45 degree viewports.<BR><BR>Brian<BR><BR>--- personal_submersibles@psubs.org wrote:<BR><BR>From: James Frankland via Personal_Submersibles <personal_submersibles@psubs.org><BR>To: Personal Submersibles General Discussion <personal_submersibles@psubs.org><BR>Subject: Re: [PSUBS-MAILIST] 8 window K350 CT<BR>Date: Fri, 14 Jul 2017 10:21:38 +0100<BR><BR>I wouldn't bother. Just make it with the normal 4. Hank may<BR>disagree, but I find the view is fine from 4. Plus you spend most<BR>time looking out the front anyway.<BR><BR>More ports to make.<BR>Awkward to weld in.<BR>More chance of distortion on tower.<BR><BR>I would change the 15" port at the front to a big dome though. :)<BR><BR>regards<BR>James<BR><BR><BR><BR><BR>On 13 July 2017 at 23:29, Pete Niedermayr via Personal_Submersibles<BR><personal_submersibles@psubs.org> wrote:<BR><BLOCKQUOTE style="margin: 0pt 0pt 1ex 0.8ex; padding-left: 1ex; border-left-color: rgb(114, 159, 207); border-left-width: 1px; border-left-style: solid;"> I think you could do 6. What do the experts say? Is this weldable ?<BR></BLOCKQUOTE></PRE></BLOCKQUOTE></DIV></P><HR><BR> On Wed, 7/12/17, hank pronk via Personal_Submersibles <personal_submersibles@psubs.org> wrote:<BR><BR> Subject: [PSUBS-MAILIST] 8 window K350 CT<BR> To: "Personal Submersibles General Discussion" <personal_submersibles@psubs.org><BR> Date: Wednesday, July 12, 2017, 6:39 AM<BR><BR> Pete,I was mistaken when I said you can push the window<BR> frames out to get more in. I was looking at my K350 CT<BR> yesterday and forgot that the port sits in a larger dia<BR> frame than I remembered. Gamma has a flat ring,<BR> making it smaller. It probably would be a bugger to<BR> weld them in, if even possible.Hank<HR><BR> Personal_Submersibles mailing list<BR>
Personal_Submersibles@psubs.org<BR> <A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><BR><HR><BR> Personal_Submersibles mailing list<BR> Personal_Submersibles@psubs.org<BR> <A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><BR><HR><BR>Personal_Submersibles mailing list<BR>Personal_Submersibles@psubs.org<BR><A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><BR><BR><BR>_______________________________________________
Personal_Submersibles mailing list
<A href="/eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org">Personal_Submersibles@psubs.org</A>
<A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A>