<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV>Hi All,</DIV><DIV>                Making progress on my propulsion.   Looks like I'm going to have two motors on each side of the sub, and talking to the propeller guy I'll probably have them turning in opposite directions, a right handed one and a left handed one to make for an even prop-wash.   My next hurdle is getting a spline made for one end of the prop shaft which will go into the gear box, the other end needs to have a taper and threads to hold the prop on.  the only thing I can't do ( don't want to do ) is the spline part, which is tricky and would take some additional tooling that I don't have.   My prop will be four bladed and about 12 to 13 inches in diameter, turning at about 500 rpm (full speed)  .  Still waiting to score a couple of controllers and potentiometers for the golf cart motors.  Any problem keeping the controller inside the sub ?  some heat I suppose .</DIV><DIV> </DIV><DIV>Brian</DIV></DIV>