<html><head></head><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:12px"><div id="yui_3_16_0_ym19_1_1466195068419_2645" dir="ltr">Today I dove Gamma to 80 feet and the cause of my list became clear. First off I extended my bottom vent tubes on the front MBT's and that fixed the list once surfaced. But the real problem was quite scary. It turns out that I am not evacuating all the air from my MBT's because there is not enough height difference between the vent valve and the tanks. I added about 200 lbs more weight than my calculations called for and that compensated for the trapped air. Now, I am no math wiz, so I chalked it up to a math error. When the sub is on an angle the air does not escape fully. I did my dive and vented till the sub was under and let her sink. I was not paying attention to the sink rate because I expected it to sink slowly thinking all the air was out of the MBT's. I was more concerned about the first time diving after all the modifications I have done. I have not done a deep test yet. Well I hit the bottom like a ton of bricks and Gamma went into the mud pretty deep I guess, because I had to use up 500 psi of air get it loose from the bottom. Once it was free, I was a rocket heading to the surface and the sub did about 4 full rotations on the way up and then It breached. Man that was freaky, so now I know the sub is too heavy because the air is trapped in the MBT's. </div><div id="yui_3_16_0_ym19_1_1466195068419_2645" dir="ltr"> There is an easy solution, I will mount manual vent valves to the tanks and rotate them with linkages from the main vent valve. I will leave the existing lines in place to get the air into the tanks but the extra valves will do the venting as well as the original vent valves.</div><div id="yui_3_16_0_ym19_1_1466195068419_2645" dir="ltr">Hank</div><div id="yui_3_16_0_ym19_1_1466195068419_2645" dir="ltr"><br></div><div id="yui_3_16_0_ym19_1_1466195068419_2645" dir="ltr">Oh ya and my hip waders had another leak.</div><div id="yui_3_16_0_ym19_1_1466195068419_2645" dir="ltr"><br></div></div></body></html>