<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV>Hank,  I had some issues as well and should have my hatch back soon.</DIV><DIV> </DIV><DIV>Brian<BR><BR>--- personal_submersibles@psubs.org wrote:<BR><BR>From: hank pronk via Personal_Submersibles <personal_submersibles@psubs.org><BR>To: Personal Submersibles General Discussion <personal_submersibles@psubs.org><BR>Subject: [PSUBS-MAILIST] re-machine hatch<BR>Date: Fri, 26 Feb 2016 01:59:16 +0000 (UTC)<BR><BR></DIV><DIV style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12px; background-color: rgb(255, 255, 255);"><DIV>Brian,</DIV><DIV dir="ltr">I had the same problem you had.  I welded the hinge to the hatch after machining, thinking it would not warp because it is super thick and heavy.   Well yesterday I got my new o-ring and decided to do a final clearance check and sure enough it had a tiny warp.   So today I spent the whole day setting up the hatch in the lathe and re-faced it.  It is a blessing in disguise because I found that I made the o-ring groove to small, not sure how that happened but it is all good now.   The vacuum test is going well.</DIV><DIV dir="ltr">Hank</DIV></DIV>_______________________________________________
Personal_Submersibles mailing list
<A href="/eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org">Personal_Submersibles@psubs.org</A>
<A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A>
</DIV>