<div dir="ltr">I have some high-current ones for the battery pods, which don't use potting. It consists of three concentric parts; a 2" stainless bar welded into the hull, a nylon spacer, and a copper bar. The SS and the spacer are both cored with a step to prevent extrusion, and the copper and nylon have O ring grooves. So the thing just disassembles with no need for potting. If memory serves, James made replicas on his boat. Of course, this solution is only suitable for high amp applications, and not something appropriate for electronics with lots of contacts.<div><br></div><div>Best,</div><div><br>Alec<br><div><br></div><div> </div></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sat, Feb 6, 2016 at 10:51 AM, Jon Wallace via Personal_Submersibles <span dir="ltr"><<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
Anyone have a home-brewed design for electrical thru-hull that I can adapt for the K-boat?<br>
<br>
Jon<br>
<br>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div><br></div>