<div dir="ltr">Hi Steve,<div><br></div><div>I have three of them on hand and all three are 1 atm air filled enclosures. Note that SCUBA depth gauges are oil filled, but I'm speaking of SCUBA tank pressure gauges. I do know oil filled ones exist, I just have not found any of that sort yet.</div><div><br></div><div>Thanks,</div><div><br>Alec </div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Sep 20, 2015 at 11:21 PM, Stephen Fordyce via Personal_Submersibles <span dir="ltr"><<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><p dir="ltr">Hi Alec,<br>
SCUBA gauges are actually oil filled (I have broken a few) and as far as I know have been taken unmodified on record dives as deep as 300m/1000ft, with no problems recorded.</p>
<p dir="ltr">Cheers,<br>
Steve</p>
<div class="gmail_quote"><div><div class="h5">On 21/09/2015 1:04 PM, "Alec Smyth via Personal_Submersibles" <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:<br type="attribution"></div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5"><div dir="ltr">I have an interesting thing to think about and wondered if any of the PSUBS brain trust might have a suggestion.<div><br></div><div>One of the simplifications on my new sub is that all HP air lines are external, aside from the BIBS (which is normally shut off anyway). Thus, I'm looking for a 3,000-4,000 psi gauge to mount outside a viewport, like in the Pisces photo that I'll paste below. In case my paste doesn't come through, it is the one at the top of the following article: <a href="http://www.nytimes.com/2015/09/15/science/piloted-deep-sea-research-is-bottoming-out.html?_r=1" target="_blank">http://www.nytimes.com/2015/09/15/science/piloted-deep-sea-research-is-bottoming-out.html?_r=1</a></div><div><br></div><div>The first thing that came to mind was to use a SCUBA submersible pressure gauge, but the problem is these are normally 1 atm dry enclosures of limited depth rating. There is generally little information posted about how deep they'll go, but what I did find was mentioned 260 feet for the plastic ones and 490 feet for the brass variety. This is a 1,000 foot sub.</div><div><br></div><div>The second idea was to use oil filled gauges intended for above-water use. But these generally have considerable bubbles in the oil, are not very good at keeping the oil inside, and have other hardware not intended to live long in sea water.</div><div><br></div><div>Any suggestions would be most welcome!<br></div><div><br></div><div><br></div><div>Thanks,</div><div><br>Alec </div><div><br></div><div><img src="cid:ii_14fedd035a3e40aa" alt="Inline image 1" width="429" height="432"><br></div></div>
<br></div></div>_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
<br></blockquote></div>
<br>_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
<br></blockquote></div><br></div>