<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV>David,</DIV><DIV>                How much was it ?    From radio Shack ?</DIV><DIV> </DIV><DIV>Brian<BR><BR>--- personal_submersibles@psubs.org wrote:<BR><BR>From: David Colombo via Personal_Submersibles <personal_submersibles@psubs.org><BR>To: Personal Submersibles General Discussion <personal_submersibles@psubs.org><BR>Subject: [PSUBS-MAILIST] Flux Gate Compass<BR>Date: Wed, 5 Aug 2015 22:49:10 -0700<BR><BR></DIV><DIV dir="ltr">Hi Guys, I just picked up a flux gate compass,by Micronta (Radio shack) which comes with about a 9" long pig tail from the sensor to the unit itself. I think it could work quite nicely if I can extend the length of wire from sensor to the display. Any thoughts about  this. The sensor is about 1" cubed and has a lead with six wires into the display. Its a 12v unit and the power input is on the display itself. So before I tear it apart, I thought I would put it out there on the possibility and how to determine the appropriate wire gauge size. I will want to extend the pigtail to around 10 feet.<DIV><BR><DIV><DIV><DIV dir="ltr"><DIV>Best Regards,<BR>David Colombo<BR><IMG width="200" height="110" src="http://static.squarespace.com/static/533310a9e4b0fba62008a464/t/5339c1f2e4b041bac4e25d1b/1396294132055/?format=500w"><BR>804 College Ave<BR>Santa Rosa, CA. 95404<BR>(707) 536-1424<BR><A href="http://www.SeaQuestor.com">www.SeaQuestor.com</A><BR><BR></DIV></DIV></DIV></DIV>
</DIV></DIV>
_______________________________________________
Personal_Submersibles mailing list
<A href="/eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org">Personal_Submersibles@psubs.org</A>
<A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A>
</DIV>