<div dir="ltr"><div>Hi All.</div><div> </div><div>I was talking with Antoine\Emile the other day about manual scrubbing. </div><div> </div><div>I have made a mask which uses a standard 3M dust filter and directs exhaled air into the scrubber.  </div><div> </div><div>This particular mask has valves so you would breath in through the filters and out through the centre vent.  Filters are not needed.</div><div> </div><div>I have added an silicone 02 breathing hose I got of ebay and bolted\glued it through onto the mask.  The hose swivels around so its really convenient.  I attached the hose to the normal scrubber outlet with a suitable piece of pipe which I machined a taper on to push into the outlet hose.</div><div> </div><div>It was really simple and works well.  I haven't tested it yet with the scrubber absorbent in but the mask itself seems good.</div><div> </div><div>I really dislike putting pictures of myself up, but I have to put this very unflattering one on here to demonstrate the device!  For some reason, t​he light makes it look like I have 2 black eyes, which I don't.  </div><div> </div><div>Kind Regards<br>James</div><div> </div><div> </div><div><img width="507" height="380" src="cid:ii_i98zqj1l1_14d1bc1160eb3e0d"><br>​</div><div> </div></div>