<html><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:12pt"><div><span>Cliff,</span></div><div style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 16px; font-style: normal; background-color: transparent;"><span>What is an axial flow filter? I am using an inspiration re-breather scrubber. I was having trouble with the CO2 level (3500ppm) and assumed it was the absorbent. I realized since that I changed the fan to 24V from the original 12V just to keep things simple in the eclectic panel. The fan may be weaker. I have ordered 4 Cartridge filters that fit my re-breather scrubber, jut to try it out.</span></div><div style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 16px;
font-style: normal; background-color: transparent;"><span>You O2 system sounds like the way to go.</span></div><div style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 16px; font-style: normal; background-color: transparent;"><span>Hank</span></div> <div class="qtdSeparateBR"><br><br></div><div class="yahoo_quoted" style="display: block;"> <div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;"> <div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;"> <div dir="ltr"> <font face="Arial" size="2"> On Thursday, July 17, 2014 12:26:09 PM, Cliff Redus via Personal_Submersibles <personal_submersibles@psubs.org> wrote:<br> </font> </div> <br><br> <div class="y_msg_container"><div id="yiv1825025736"><div><div style="color: rgb(0, 0, 0); font-family:
HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt; background-color: rgb(255, 255, 255);"><div><span></span></div><div></div><div>Hank</div><div><br clear="none"></div><div>The scrubber I use looks like <a href="http://www.amazon.com/Maverick-Sun-Charcoal-Filter-12-Inch/dp/B00CALYSZ0" target="_blank" rel="nofollow" shape="rect">http://www.amazon.com/Maverick-Sun-Charcoal-Filter-12-Inch/dp/B00CALYSZ0</a></div><div><br clear="none"></div><div>the unit has an overall diameter of 6" and 12" tall with a flange size of 4". <br clear="none">I used epoxy to secure the inside screen to the base. To fill, just take the top off, dump the old Sodasorb HP and fill with new absorbent. For one person, my filter last about 8 hours.</div><div><br clear="none">Cliff<br clear="none"><br clear="none"><br clear="none"></div><div><br clear="none">Cliff Redus<br clear="none">Redus Engineering<br
clear="none">USA mobile: 830-931-1280<br clear="none">cliffordredus@sbcglobal.com </div> <div class="yiv1825025736qtdSeparateBR"><br clear="none"><br clear="none"></div><div class="yiv1825025736yahoo_quoted" style="display: block;"> <div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;"> <div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;"> <div class="yiv1825025736yqt3847952681" id="yiv1825025736yqt06088"><div dir="ltr"> <font face="Arial" size="2"> On Thursday, July 17, 2014 11:01 AM, James Frankland via Personal_Submersibles <personal_submersibles@psubs.org> wrote:<br clear="none"> </font> </div> <br clear="none"><br clear="none"> <div><div id="yiv1825025736"><div><div dir="ltr"><div>Alec,</div><div>Reading this, do you have any details of your OTS radial filter that Cliff
mentions?</div><div>Thanks</div><div>James</div></div><div><br clear="none"><br clear="none"><div>
On 17 July 2014 16:30, Cliff Redus via Personal_Submersibles <span dir="ltr"><<a href="mailto:personal_submersibles@psubs.org" target="_blank" rel="nofollow" shape="rect" ymailto="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>></span> wrote:<br clear="none"><blockquote style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;">
<div id="yiv1825025736yqt12800"><div><div style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt; background-color: rgb(255, 255, 255);"><div><span></span></div><div></div><div>Hank</div><div>
<br clear="none"></div><div>On the R300, I have life support module I call the AMOC system (Air monitoring and Oxygen Control). Connected to the box is a 1/4" SS tubing with Swagelok fittings connected to a O2 supply from an external 2200 psig O2 bottle. I fill this with welding O2 with a whip. In the AMOC module is a medical pressure reducing regulator (Hudson model 2000). This regulator reduces the pressure to around 5 psig. The pressure downstream of the regulator is adjustable with a maximum rate of 15 SLPM. The porting on this regulator is two 1/4" NPT HP ports and one LP port. Downstream of this regulator, I have installed an O2 thermal mass meter/ controller from Porter.
The model number is 201-FSVP. This controller can be set from 0-10 SLPM via an 0-5V analog input signal. Max pressure on the O2 controller is 25 psig. This O2 controller also sends out at 0-5V analog output signal of the O2 SLPM flow rate.</div>
<div><br clear="none"></div><div>Both these items were purchased on Ebay at a fraction of list. I have been very happy with the performance of these units. By measuring the O2 and CO2 percentages in the cabin, I have a PLC that opens and closes this controller to keep the cabin O2 % between 19-22%. ABS regulations requires that the O2 be held with in 18-24%. The advantage of this system is that it automatically accounts for different metabolic consumptions rates for O2. In the AMOC unit, I have a Swagelok needle valve in a bypass around this controller so that if both main and back up power are lost, the pilot can manually adjust the O2 rate
into the boat.</div><div><br clear="none"></div><div>The second part to controlling the atmosphere in the cabin is scrubbing the CO2. I initially used a axial flow filter with SodaSorb HP. I found that the axial flow filter did not work very well with CO2 in the cabin ranging from 0-7000 ppm. Part of the problem was the axial filter arrangement and part of the problem was the blower was not strong enough. At the 2012 PSUB convention in Vancouver, Alec Symth brought the scrubber he was using on Snoopy as a show and tell. His scrubber is an OTS radial filter that is used to clean air. In 2013, I switch to this type of scrubber/filer again with SodaSorb HB and the scrubber has worked much better. It consistently keeps the CO2 level below 2000 ppm with most of the time it being 1000-1500 ppm. ABS rules require that you keep O2 concentration below 5000 ppm. Part of the reason that is
works better
is the radial design which minimizes the pressure drop through the Sodasorb and part is that I have switched to a stronger blower.</div><div><br clear="none"></div><div>Long answer to short question.</div><div><br clear="none"></div><div><br clear="none">Cliff<br clear="none">
<br clear="none"><br clear="none"></div><div><br clear="none"></div> <div><br clear="none"><br clear="none"></div><div style="display: block;"> <div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;"> <div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;">
<div><div> <div dir="ltr"> <font face="Arial"> On Thursday, July 17, 2014 9:27 AM, hank pronk via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank" rel="nofollow" shape="rect" ymailto="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br clear="none">
</font> </div> <br clear="none"><br clear="none"> </div></div><div><div><div><div><div><div style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt; background-color: rgb(255, 255, 255);">
<div>Hi All,</div><div>I need to find a pediatric flow meter and regulator for Gamma. Or is there something better?</div><div>Hank</div></div></div></div><br clear="none"></div></div><div>_______________________________________________<br clear="none">
Personal_Submersibles mailing list<br clear="none"><a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="nofollow" shape="rect" ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br clear="none"><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank" rel="nofollow" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none">
<br clear="none"><br clear="none"></div></div> </div> </div> </div> </div></div></div><br clear="none">_______________________________________________<br clear="none">
Personal_Submersibles mailing list<br clear="none">
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="nofollow" shape="rect" ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br clear="none">
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank" rel="nofollow" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none">
<br clear="none"></blockquote></div><br clear="none"></div></div></div><br clear="none"><div id="yiv1825025736yqt90395">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="nofollow" shape="rect" ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br clear="none"><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank" rel="nofollow" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div><br clear="none"><br clear="none"></div></div> </div> </div> </div> </div></div></div><br><div class="yqt3847952681" id="yqt98673">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a href="mailto:Personal_Submersibles@psubs.org" shape="rect"
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br clear="none"><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div><br><br></div> </div> </div> </div> </div></body></html>