<div dir="ltr">Hi Jon,<div><br></div><div>I tried one side by side with a Trustfire just now and it's actually really hard to tell. Its just that the Trustfire is a pencil thin beam and the new ones are the exact opposite. That in itself should be an advantage for the new ones. In a pinch, I'd say they are about the same total output, but that's very very approximate. One thing I wonder about... the new lights have a very wide operating range of voltage, they work with anything from 12V to 48V. I'm running them on 12V and wonder whether higher voltage would equate to higher output. </div>
<div><br></div><div>To answer your other question, the mounting bracket is stainless. I'm thoroughly impressed by the build quality, they didn't skimp on these.</div><div><br></div><div><br></div><div>Best,</div><div>
<br>Alec</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, May 14, 2014 at 8:09 AM, Jon Wallace via Personal_Submersibles <span dir="ltr"><<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
  
    
  
  <div bgcolor="#FFFFFF" text="#000000">
    <div>Alec,<br>
      <br>
      How does the light of both compare to your eyes?  They are both
      listed at about the same lumen output.  The Trustfire uses three
      1000 lumen CREE led's whereas this floodlight uses sixteen 200 (or
      so) lumen led's.  I realize the trustfire is more of a spotlight
      but just curious how they match up as perceived by your eyes in
      terms of total light output.<br>
      <br>
      Jon<div class=""><br>
      <br>
      <br>
      On 5/14/2014 4:52 AM, James Frankland via Personal_Submersibles
      wrote:<br>
    </div></div><div class="">
    <blockquote type="cite">
      <div>Hi Alec,</div>
      <div>Those lights on your link look good.  Let us know how you get
        on with your test next week, I and im sure others would be
        interested to know how they perform.<br>
        Thanks</div>
      <div>James<br>
        <br>
      </div>
      <div class="gmail_quote">On 13 May 2014 14:02, Alec Smyth via
        Personal_Submersibles <span dir="ltr"><<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>></span>
        wrote:<br>
        <blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
          <div dir="ltr">I used Trustfire lights for a season on Snoopy
            but the experience was all around bad. I bought two, one of
            which did not work due to a faulty connection at the endcap
            (which acts like a switch). The factory shipped me a new
            end-cap that fixed the problem. In fresh water they worked
            well, but when I went to Islamorada last year they lasted
            less than a day in the salt water. After just hours, one
            stopped working altogether and both lights were very visibly
            corroded. Silly me, I hadn't thought this through. The
            Trustfire lights close the circuit when you screw in the
            endcap on the handle. They use the light body itself as a
            conductor, like a car uses its chassis. I think the issue is
            that if you put two such lights in salt water, you will get
            stray currents between them. 
            <div><br>
            </div>
            <div>On next week's dive I'll be testing new lights, which
              are LED flood lights intended for tractors or off road
              vehicles. I've been really impressed with how solid these
              are. They are wired with two cables, rather than using the
              light body as a ground. Second, they have a little screw
              that serves no visible purpose, but which when removed
              allows you to fill them with mineral oil. It took a while
              to get the last bubbles out, but with patience you can
              fill these with oil and remove all bubbles in about an
              hour. The front plastic has a little give to absorb the
              compression if I have any bubbles left, but I think I have
              none. To fill them I used a syringe with a "dispenser
              needle" which is a blunt syringe needle you use for
              filling things rather than giving someone an injection.
              The lights are IP67, so supposedly water-tight, but my
              only mod was to reinforce the cable gland with some epoxy.
              We shall see how they work, but my hopes are up, I think
              these might finally be the ideal sub lights and can be
              used virtually off the shelf. I recommend not buying them
              until Snoopy returns from next week's dive, but here is
              the link if you want to take a look in the meantime.</div>
            <div><br>
            </div>
            <div><a href="http://www.surpluscenter.com/Electrical/Lights/DC-Mobile-Equipment-Lights/12-24-VDC-3120-LUMEN-16-LED-UTILITY-FLOOD-LIGHT-12-999-B.axd" target="_blank">http://www.surpluscenter.com/Electrical/Lights/DC-Mobile-Equipment-Lights/12-24-VDC-3120-LUMEN-16-LED-UTILITY-FLOOD-LIGHT-12-999-B.axd</a></div>

            <div><br>
            </div>
            <div><br>
            </div>
            <div>Best,</div>
            <div><br>
              Alec</div>
            <div>    </div>
          </div>
          <div>
            <div>
              <div class="gmail_extra"><br>
              </div>
            </div>
          </div>
        </blockquote>
      </div>
    </blockquote>
    <br>
  </div></div>

<br>_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
<br></blockquote></div><br></div>