<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV>Got myself an old oven out of an oven graveyard.  Got the kiln control and computer unit.  I had to get a lower range thermostat however since my temperatures are going to be relatively low.  What I think I'm going to do is to use one of the range top elements as the heating source for the oven.  The problem with using the element in the oven is that it is controlled by a thermostat and it will only be on or off.  I'm thinking with the range top element it will give me another avenue of control, where I can select the amount of heat coming off the element and then also have in turn on or off with the kiln thermostat.  Those elements will work using either 240 V or 110 V so I'll run it with 110 V .  The control unit is pretty nifty, it has up to 50 temperature settings and will ramp up and down, I think it will do everything I need it to do.  Programing it is going to be a bit tedious but doable.  </DIV><DIV> </DIV><DIV>Brian </DIV></DIV>