<div>Hi Steve\Brian,</div>
<div> </div>
<div>Yes, i did end up using the RT310 epoxy. I had a real pain initially. I didnt mix it properly and so i wasnt 100% sure it cured inside the thruster penetrators. So i heated it and broke it all out. Then i conducted a load of experiments with different types of epoxy and ended up using the RT310 anyway.</div>
<div> </div>
<div>there was another called Eli Chems low viscosity epoxy that was also very good. I almost used that. The only other thing i can say is that Resin Tech were hopeless. They were not really interested in sending such a small amount. Well, they were, it just took me ages of ringing and badgering to get the product. Eli chem were a lot better and the product was in convenient ready to mix sachets. The section on the experiments i did starts here on my site.</div>
<div> </div>
<div><a href="http://www.guernseysubmarine.com/Extended_files/Page24592.htm">http://www.guernseysubmarine.com/Extended_files/Page24592.htm</a> Just keep pressing the "Next" button until you get to the results. There are some other things about lights and stuff in between.</div>
<div> </div>
<div>The brass rods running through the penetrators are 4mm diameter.</div>
<div> </div>
<div>Kind Regards<br>James F<br><br></div>
<div class="gmail_quote">On 23 April 2014 07:21, Brian Cox via Personal_Submersibles <span dir="ltr"><<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div style="FONT-FAMILY:Arial,sans-serif;FONT-SIZE:10pt">
<div><br>James,</div>
<div> What is the largest gage wire you are running through an epoxy fitting?</div>
<div> </div>
<div>Brian</div>
<div> </div>
<div><br>--- <a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a> wrote:<br><br>From: Steve McQueen via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>><br>
To: Personal Submersibles General Discussion <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>><br>Subject: Re: [PSUBS-MAILIST] Potting Compound<br>Date: Tue, 22 Apr 2014 15:45:13 -0400<br>
<br></div>
<div>
<div class="h5">
<div dir="ltr">James, did you end up using this product? Were you happy with it?<br><br>Steve<br></div>
<div><br><br>
<div>On Tue, Feb 5, 2013 at 9:11 AM, James Frankland <span dir="ltr"><<a href="mailto:jamesf@guernseysubmarine.com" target="_blank">jamesf@guernseysubmarine.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:rgb(204,204,204) 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex">Hi All,<br><br>I've done quite a bit of research into potting compounds and i think<br>this is one im going to use for my side thruster penetrators.<br>
<br>I'm 99% sure this will be fine, but as im a worrier, i thought id ask<br>just in case someone spots some glaring error ive not noticed.<br><br><a href="http://www.resintech.co.uk/downloads/tds/RT310.pdf" target="_blank">http://www.resintech.co.uk/downloads/tds/RT310.pdf</a><br>
<br>many thanks all,<br>Regards<br>James<br><br><br><br>************************************************************************<br>************************************************************************<br>************************************************************************<br>
The personal submersibles mailing list complies with the US Federal<br>CAN-SPAM Act of 2003. Your email address appears in our database<br>because either you, or someone you know, requested you receive messages<br>from our organization.<br>
<br>If you want to be removed from this mailing list simply click on the<br>link below or send a blank email message to:<br> <a href="mailto:removeme-personal_submersibles@psubs.org" target="_blank">removeme-personal_submersibles@psubs.org</a><br>
<br>Removal of your email address from this mailing list occurs by an<br>automated process and should be complete within five minutes of<br>our server receiving your request.<br><br><a href="http://psubs.org/" target="_blank">PSUBS.ORG</a><br>
PO Box 53<br>Weare, NH 03281<br><a>603-529-1100</a><br>************************************************************************<br>************************************************************************<br>************************************************************************<br>
<br></blockquote></div><br></div></div></div>_______________________________________________ Personal_Submersibles mailing list <a href="http://eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org" target="_blank">Personal_Submersibles@psubs.org</a> <a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a> </div>
<br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
<br></blockquote></div><br>