<div>Hi All,</div>
<div> </div>
<div>Does anyone have any experience in cutting\re-joining thin ribbon type cable.  I'm going to modify my motor controllers so that the buttons are on the handles like they should be.  Where they are at the moment its awkward to steer and operate the power at the same time.  Ideally i'd like to cut the ribbon cable and extend it so i can have the pots on the handles.  But im not sure if I cut the cable, i'll be able to get them back together.</div>

<div> </div>
<div>Its the 3 white ribbon cables in this picture, with the blue pots on the end.  I want to extend these to the handles.</div>
<div> </div>
<div><a href="http://www.guernseysubmarine.com/extended_files/Page18279.htm">http://www.guernseysubmarine.com/extended_files/Page18279.htm</a></div>
<div> </div>
<div>Also looks like Jim K has done a similar thing on Guppy.  Last pictures on his page.</div>
<div> </div>
<div><a href="http://www.psubs.org/projects/1234567814/bionicguppy/">http://www.psubs.org/projects/1234567814/bionicguppy/</a></div>
<div> </div>
<div>Anyone cut these type of cables and got them back together?</div>
<div> </div>
<div>Kind Regards</div>
<div>James</div>