<font color='black' size='3' face='Arial, Helvetica, sans-serif'><font class="Apple-style-span" size="3">That's the PC15 motor room section. It was cut precisely through the weld, and retains the 54" OD that it was built to.</font>
<div><font class="Apple-style-span" size="3">Vance<br>
</font><br>
<br>
<div style="font-family: helvetica, arial; font-size: 10pt; color: black; ">-----Original Message-----<br>
From: hank pronk <hanker_20032000@yahoo.ca><br>
To: Personal Submersibles General Discussion <personal_submersibles@psubs.org><br>
Sent: Tue, Jan 7, 2014 8:34 am<br>
Subject: Re: [PSUBS-MAILIST] conical transitions<br>
<br>
<div id="AOLMsgPart_2_d4e9d416-e41e-4a8a-86ad-a84fdb268471">
<div class="aolReplacedBody">
<div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:12pt">
<div><span>Joe,</span></div>
<div><span>There is a cone section for sale with a good picture on psubs . That will give you an idea of how it was done. I am not sure if the dia of the cone is still the dia of the hull. You could ask the seller how far back from the cylinder it was cut off.</span></div>
<div><span>Hank</span></div>
<div class="yahoo_quoted" style="display: block;"> <br>
<br>
<div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;">
<div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;">
<div dir="ltr"> <font face="Arial" size="2"> On Tuesday, January 7, 2014 5:30:16 AM, Joe Perkel <<a href="mailto:josephperkel@yahoo.com">josephperkel@yahoo.com</a>> wrote:<br>
</font>
</div>
<div class="y_msg_container">
<div id="yiv8127102616">
<div><table border="0" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" rowspan="1" colspan="1">David,<br clear="none"><br clear="none">Is that T ring directly on the weld line, or offset any distance?<br clear="none"><br clear="none">Joe<a target="_blank" href="http://overview.mail.yahoo.com/?.src=iOS" rel="nofollow" shape="rect"><br clear="none"><br clear="none">Sent from Yahoo Mail for iPad</a></td></tr></tbody></table>
<div class="yiv8127102616yqt3660377763" id="yiv8127102616yqt98104">
<div id="yiv8127102616_origMsg_">
<div>
<br clear="none">
<div>
<div style="font-size: 0.9em;">
<div class="hr" style="margin: 5px 0px; padding: 0px; border: 1px solid rgb(204, 204, 204); border-image: none; height: 0px; line-height: 0; font-size: 0px;" readonly="true"></div>
<b>
<span style="font-weight: bold;">From:</span>
</b>
Joe Perkel <<a href="mailto:josephperkel@yahoo.com">josephperkel@yahoo.com</a>>; <br clear="none">
<b>
<span style="font-weight: bold;">To:</span>
</b>
<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a> <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>>; <br clear="none">
<b>
<span style="font-weight: bold;">Subject:</span>
</b>
Re: [PSUBS-MAILIST] conical transitions <br clear="none">
<b>
<span style="font-weight: bold;">Sent:</span>
</b>
Mon, Jan 6, 2014 2:08:18 AM <br clear="none">
</div>
<br clear="none">
<table border="0" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" rowspan="1" colspan="1"><table border="0" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" rowspan="1" colspan="1">Thanks gentlemen, for those informative responses.<br clear="none"><br clear="none">I come away from this particular subject with a renewed perspective on my mission, which is a safe but fun boat for sport diving depths, day and night. So my mind remains open to various ideas. Hull transitions come into play in trying to shape the end product a bit more "boat like" while attempting to keep overall dimensions in check.<br clear="none"><br clear="none">Thanks again!<br clear="none"><br clear="none">Joe<br clear="none"><a target="_blank" href="http://overview.mail.yahoo.com/?.src=iOS" rel="nofollow" shape="rect"><br clear="none"><br clear="none">Sent from Yahoo Mail for iPad</a></td></tr></tbody></table>
<div class="yiv8127102616yqt4919619563" id="yiv8127102616yqt00765">
<div id="yiv8127102616_origMsg_">
<div>
<br clear="none">
<div>
<div style="font-size: 0.9em;">
<div class="hr" style="margin: 5px 0px; padding: 0px; border: 1px solid rgb(204, 204, 204); border-image: none; height: 0px; line-height: 0; font-size: 0px;" readonly="true"></div>
<b>
<span style="font-weight: bold;">From:</span>
</b>
hank pronk <<a href="mailto:hanker_20032000@yahoo.ca">hanker_20032000@yahoo.ca</a>>; <br clear="none">
<b>
<span style="font-weight: bold;">To:</span>
</b>
Personal Submersibles General Discussion <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>>; <br clear="none">
<b>
<span style="font-weight: bold;">Subject:</span>
</b>
Re: [PSUBS-MAILIST] conical transitions <br clear="none">
<b>
<span style="font-weight: bold;">Sent:</span>
</b>
Sun, Jan 5, 2014 6:33:54 PM <br clear="none">
</div>
<br clear="none">
<table border="0" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" rowspan="1" colspan="1">
<div style="color: rgb(0, 0, 0); font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt; background-color: rgb(255, 255, 255);">
<div><span>Joe,</span></div>
<div><span>A 36in hull dia will give you a 18in deep hemi. That seems plenty of room for your motor etc. I would go hemi and buy the kid a nice car. I am wiring my motor etc today and am sure happy to be sitting comfortably in the back of gamma with the larger dia hull.</span></div>
<div><span>Hank</span></div>
<div class="yiv8127102616yahoo_quoted" style="display: block;"> <br clear="none"> <br clear="none">
<div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;">
<div style="font-family: HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-size: 12pt;">
<div class="yiv8127102616yqt2128537019" id="yiv8127102616yqt59335">
<div dir="ltr"> <font face="Arial" size="2"> On Sunday,
January 5, 2014 10:04:13 AM, "<a href="mailto:vbra676539@aol.com">vbra676539@aol.com</a>" <<a href="mailto:vbra676539@aol.com">vbra676539@aol.com</a>> wrote:<br clear="none">
</font> </div>
<div class="yiv8127102616y_msg_container">
<div id="yiv8127102616">
<div><font color="black" face="Arial, Helvetica, sans-serif" size="3"><font class="yiv8127102616Apple-style-span" size="3">Hmm. I have seen some bolted grain tanks and that sort of thing. I don't see why they couldn't do it the other way. Probably could, come to think of it. They handle big stuff so could probably do bolt patterns and surface machining as well. The problem for local shops would be to handle a structure that size, of course, and the tank fab people would be set up to do it already. I'll bet it isn't as expensive as you think. Maybe less than a used car, anyway, although it might not be much less, depending on the car. You'll learn to love bolted sections, though. Man does it make fit-out easier. Not to mention overhauls.</font>
</font>
<div><font class="yiv8127102616Apple-style-span" size="3">Vance<br clear="none">
</font><br clear="none">
<br clear="none">
<div style="color: black; font-family: helvetica, arial; font-size: 10pt;">-----Original Message-----<br clear="none">
From: Joe Perkel <<a href="mailto:josephperkel@yahoo.com">josephperkel@yahoo.com</a>><br clear="none">
To: personal_submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>><br clear="none">
Sent: Sun, Jan 5, 2014 11:00 am<br clear="none">
Subject: Re: [PSUBS-MAILIST] conical transitions<br clear="none">
<br clear="none">
<div class="yiv8127102616yqt6635363009" id="yiv8127102616yqt69899">
<div id="yiv8127102616AOLMsgPart_2_29eafaae-0fee-493c-b6d5-2f85739a835f">
<table border="0" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" rowspan="1" colspan="1">Vance,<br clear="none">
<br clear="none">
The cone in consideration is in fact a motor room, with a golf cart motor inside for better air cooling. Also a compressor to finish blowing down the large volume tanks once surfaced, ventilation, and dehumidification equipment all housed. Contemplating all this for a shallow water (250' operational), 36 OD, about 18 - 20' length overall.<br clear="none">
<br clear="none">
Would the same tank fabricators give me internally flanged separating hull sections without sacrificing the kids first car?<br clear="none">
<br clear="none">
Joe<a target="_blank" href="http://overview.mail.yahoo.com/?.src=iOS" rel="nofollow" shape="rect"><br clear="none">
<br clear="none">
Sent from Yahoo Mail for iPad</a></td></tr></tbody></table>
<div id="yiv8127102616_origMsg_">
<div>
<br clear="none">
<div>
<div style="font-size: 0.9em;">
<div class="yiv8127102616hr" style="margin: 5px 0px; padding: 0px; border: 1px solid rgb(204, 204, 204); border-image: none; height: 0px; line-height: 0; font-size: 0px;"></div>
<b>
<span style="font-weight: bold;">From:</span>
</b>
<a rel="nofollow" shape="rect">vbra676539@aol.com</a> <<a rel="nofollow" shape="rect">vbra676539@aol.com</a>>; <br clear="none">
<b>
<span style="font-weight: bold;">To:</span>
</b>
<<a rel="nofollow" shape="rect">personal_submersibles@psubs.org</a>>; <br clear="none">
<b>
<span style="font-weight: bold;">Subject:</span>
</b>
[PSUBS-MAILIST] conical transitions <br clear="none">
<b>
<span style="font-weight: bold;">Sent:</span>
</b>
Sun, Jan 5, 2014 2:05:55 PM <br clear="none">
</div>
<br clear="none">
<table border="0" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" rowspan="1" colspan="1"><font color="black" face="Arial, Helvetica, sans-serif" size="3"><font class="yiv8127102616Apple-style-span" size="3">Joe,</font>
</font>
<div><font class="yiv8127102616Apple-style-span" size="3"><br clear="none">
</font>
<div><font class="yiv8127102616Apple-style-span" size="3">Tank fabricators will do a cone with a pre-formed transition knuckle on order. It gives you a matched cylinder for your hull. The early Perry boats had that sort of thing, although they were fabricated in house and required a double weld (at the cylinder and between the knuckle and cone). Later, they stopped doing it. That would have added to the expense of fabricating a hull, and one supposes that the engineers figured out they didn't need it for the pressures in question. Everything they built was limited to the double-continental shelf standard (1200 feet or less) except for the 16's which required a whole 'nother thought process.</font></div>
<div><font class="yiv8127102616Apple-style-span" size="3"><br clear="none">
</font></div>
<div><font class="yiv8127102616Apple-style-span" size="3">If Cliff Redus gets back online, you can ask him. The R300 has long conical section(s) aft of the crew compartment, and Cliff is an engineer, so you have to figure he's been all through this. One other variation at Perry comes to mind, which is the 1202. The diver lock out section was 54" and the pressure hull was the standard 48" PC-12 size. The DLO has two short 48" OD cylindrical sections welded to the elliptical heads of the DLO with mating flanges for the motor room and crew compartment interface(s). Sort of a step-down, step-up option.</font></div>
<div><font class="yiv8127102616Apple-style-span" size="3"><br clear="none">
</font></div>
<div><font class="yiv8127102616Apple-style-span" size="3">The PC-18 class of DLO sub was an extension of that. They went to full length 54" OD hull for both compartments, ditched the motor room in favor of a pivoting 10hp thruster/rudder assembly aft, and got a shorter boat with roughly the same displacement overall. NOTE: Based on our experience, they also reduced the gas storage and battery pod length, effectively shortening mission endurance, but also shortening the boat about 7 feet and reducing crane weight by over 2 tons. Not a bad trade-off, and Intersub ran the hell out of the 18s, so it must have been a decent compromise. I have no experience with them, but the other pilots liked them a lot.</font></div>
<div><font class="yiv8127102616Apple-style-span" size="3"><br clear="none">
</font></div>
<div><font class="yiv8127102616Apple-style-span" size="3">Vance</font></div>
</div>
</td></tr></tbody></table>
</div>
</div>
</div>
</div>
</div>
<div id="yiv8127102616AOLMsgPart_3_29eafaae-0fee-493c-b6d5-2f85739a835f" style="margin: 0px; color: rgb(0, 0, 0); font-family: Tahoma, Verdana, Arial, Sans-Serif; font-size: 12px; background-color: rgb(255, 255, 255);">
<pre style="font-size: 9pt;"><tt>_______________________________________________
Personal_Submersibles mailing list
<a rel="nofollow" shape="rect">Personal_Submersibles@psubs.org</a>
<a target="_blank" href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a>
</tt></pre>
</div>
</div>
</div>
</div>
</div>
<br clear="none">
<div class="yiv8127102616yqt6635363009" id="yiv8127102616yqt78158">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a rel="nofollow" shape="rect">Personal_Submersibles@psubs.org</a><br clear="none"><a target="_blank" href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div>
<br clear="none"><br clear="none"></div>
</div>
</div>
</div>
</div>
</div>
</td></tr></tbody></table>
</div>
</div>
</div>
</div>
</td></tr></tbody></table>
</div>
</div>
</div>
</div>
</div>
</div>
<br>
<div class="yqt3660377763" id="yqt02215">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a href="mailto:Personal_Submersibles@psubs.org" shape="rect">Personal_Submersibles@psubs.org</a><br clear="none"><a target="_blank" href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" shape="rect">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div>
<br>
<br>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<div id="AOLMsgPart_3_d4e9d416-e41e-4a8a-86ad-a84fdb268471" style="margin: 0px;font-family: Tahoma, Verdana, Arial, Sans-Serif;font-size: 12px;color: #000;background-color: #fff;">
<pre style="font-size: 9pt;"><tt>_______________________________________________
Personal_Submersibles mailing list
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a>
</tt></pre>
</div>
<!-- end of AOLMsgPart_3_d4e9d416-e41e-4a8a-86ad-a84fdb268471 -->
</div>
</div>
</font>