<p dir="ltr">Bob,<br>
That's a very good observation on your part. Your vbt won't live long with an inch of residual salt or freshwater left in it . A drain plug is a  necessary revision to the Kittredge design. I would recommend welding in a stainless steel bushing and screwing in a pipe plug.<br>

Dan Lance</p>
<div class="gmail_quote">On Dec 17, 2013 1:11 AM, "Bob Travis" <<a href="mailto:bobtravis@comcast.net">bobtravis@comcast.net</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
I'm about ready to assemble my VBT and have noticed that there will be about an inch of water left inside after it has been fully blown.  I looked through the archives and can't find any discussion about water remaining in the tank. Is this a bad thing?  All the photos of all the other K-350's that I've looked at don't have any way of draining the last bit of water out of the tank. Can anyone give me some advise here?  I don't like the idea of water remaining in it long term.<br>

<br>
Any advise would be greatly appreciated.<br>
<br>
Thanks!<br>
<br>
Bob<br>
Sent from my iPhone<br>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>