<div>Alec\SCott,</div>
<div> </div>
<div>Yes, i will take it to the dive shop first before tinkering any more. Really annoying, its brand new! </div>
<div>thanks</div>
<div>James<br><br></div>
<div class="gmail_quote">On 25 October 2013 13:42, <span dir="ltr"><<a href="mailto:swaters@waters-ks.com" target="_blank">swaters@waters-ks.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div><span style="FONT-FAMILY:Verdana;FONT-SIZE:10pt">
<div>Alec,</div>
<div>My surface unit works the same with the connecting wires creating a "switch" when the transducer is plugged in. My take is the connection in the transducer is broken or the surface unit is broken. James, you might take it to the tech dive shop and try one of there transducers and see if it works then. If not then you know it is the surface unit. If it is the surface unit, open up the surface unit and check the "switch" wires to be sure they haven't been disconnected. Check the speaker wires to be sure they haven't been disconnected. Just a some dumb possibilities... Make sure volume is turned up, make sure to test the transducer you put it in water or push it up against another transducer, be sure the speaker switch is turned on, be sure the surface unit has a fully charged battery. Probably not the problem, but just double check that stuff.</div>
<div> </div>
<div>Thanks,</div>
<div>Scott Waters </div>
<div> </div>
<blockquote style="BORDER-LEFT:blue 2px solid;PADDING-LEFT:8px;FONT-FAMILY:verdana;MARGIN-LEFT:8px;FONT-SIZE:10pt">
<div>
<div class="im">-------- Original Message --------<br>Subject: Re: [PSUBS-MAILIST] OTS Issue<br></div>
<div class="im">From: "Smyth, Alec" <<a href="mailto:Alec.Smyth@covisint.com" target="_blank">Alec.Smyth@covisint.com</a>><br>Date: Fri, October 25, 2013 5:30 am<br>To: Personal Submersibles General Discussion<br>
</div>
<div>
<div class="h5"><<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>><br><br>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt">Sounds like our transducer connectors are a little different, which could be explained by the fact you have a surface unit whereas I use a diver unit on the surface. I know Dan Lance, Cliff, and Scott all have surface units like yours, so maybe they can weigh in. But to me it does sound like it might be broken, and your plan to plug in an un-hacked transducer the way to find out for sure. <u></u><u></u></span></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt"><u></u> <u></u></span></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt"><u></u> <u></u></span></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><b><span style="FONT-FAMILY:'Tahoma','sans-serif';FONT-SIZE:10pt">From:</span></b><span style="FONT-FAMILY:'Tahoma','sans-serif';FONT-SIZE:10pt"> Personal_Submersibles [<a href="mailto:personal_submersibles-bounces@psubs.org" target="_blank">mailto:personal_submersibles-bounces@psubs.org</a>] <b>On Behalf Of </b>James Frankland<br>
<b>Sent:</b> Friday, October 25, 2013 8:20 AM<br><b>To:</b> Personal Submersibles General Discussion<br><b>Subject:</b> Re: [PSUBS-MAILIST] OTS Issue<u></u><u></u></span></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Hi Alec,<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Ok, at least i wasnt being a noddy.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">So, this is what i did.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Plugged the batteries in and checked 12V at the output. All ok.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">At the back of the transducer socket, there are 3 wires coming out. 2 go into 1 plug on the pcb and 1 goes into a seperate plug. Lets call them A\B for the pair and C for the single.<u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">I could just get my meter on the exposed wires to check voltage.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">WITHOUT the transducer plugged in, I was getting 12v accross A\B to C and also continuity the same.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">WITH the transducer plugged in i got nothing. No voltage at all and no continuity between A\B and C.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Next I manually connected pins 1 to 3 together in all configurations. Nothing came on.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">I have a horrible feeling its broken.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Next I am going to take the whole unit to my local tech dive shop. The guy has lots of OTS kit and will have a transducer thats not been hacked for me top try.<u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">regards<u></u><u></u></div></div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal">James<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On 25 October 2013 13:09, Alec Smyth <<a href="mailto:alecsmyth@gmail.com" target="_blank">alecsmyth@gmail.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">The OTS box does not know whether the transducer is in the water or not. What will turn it on is connecting the transducer cable. When you do so, you are closing the connection between contacts 1 and 3, and closing that circuit is the equivalent of clicking an "on" switch. <u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Best,<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Alec<u></u><u></u></div></div></div>
<div>
<div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On Fri, Oct 25, 2013 at 6:52 AM, James Frankland <<a href="mailto:jamesf@guernseysubmarine.com" target="_blank">jamesf@guernseysubmarine.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Hi Alec,<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Before i report my finding of last night, i think i might be being a complete numpty. I am assuming that the radio will come on even though the transducer is not in the water? Obviously no signal but i was assuming the radio would at least crackle to life. Does the transducer need to be underwater before the radio will switch on??<u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Thanks<u></u><u></u></div></div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><span style="COLOR:#888888">James<u></u><u></u></span></div></div>
<div>
<div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On 24 October 2013 13:09, James Frankland <<a href="mailto:jamesf@guernseysubmarine.com" target="_blank">jamesf@guernseysubmarine.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Hi Alec,<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Ok, i think i get it. I will investigate later and report back...! Many thanks.<u></u><u></u></div></div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><span style="COLOR:#888888">James<u></u><u></u></span></div></div>
<div>
<div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On 24 October 2013 12:56, Alec Smyth <<a href="mailto:alecsmyth@gmail.com" target="_blank">alecsmyth@gmail.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Let me try and re-word this... You will find the cable has two conductors, but the connector has three contacts. Two of the contacts are connected to the same cable. Thus when you screw the connector onto the OTS unit, it closes a circuit between the two contacts. Don't cut open the connector, you can explore this just by checking continuity between the contacts. <u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Sorry, I hope I'm not repeating myself!<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="COLOR:#888888"><u></u> <u></u></span></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="COLOR:#888888"><br>Alec<u></u><u></u></span></div></div></div>
<div>
<div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On Thu, Oct 24, 2013 at 6:42 AM, James Frankland <<a href="mailto:jamesf@guernseysubmarine.com" target="_blank">jamesf@guernseysubmarine.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Im a bit confused as when i cut the cable (some distance from the connector), there are only 2 cables. The inner cable and the shield. So not sure where this 3rd cable is. I will take the connector appart and investigate....<u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Thanks<u></u><u></u></div></div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><span style="COLOR:#888888">james<u></u><u></u></span></div></div>
<div>
<div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On 24 October 2013 11:20, Alec Smyth <<a href="mailto:alecsmyth@gmail.com" target="_blank">alecsmyth@gmail.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">In the connector you screw onto the OTS box, just connect both 1 and 3 to the same cable. <u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Best,<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><br>Alec<u></u><u></u></div></div></div>
<div>
<div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On Thu, Oct 24, 2013 at 5:02 AM, James Frankland <<a href="mailto:jamesf@guernseysubmarine.com" target="_blank">jamesf@guernseysubmarine.com</a>> wrote:<u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Hi Emile\Alec,<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><br>Thanks for that info. Not quite sure how i can connect pins 1 and 3, but i will have another look at it later on after work and see how it looks.<u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">Many thanks<u></u><u></u></div></div>
<div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal">James<u></u><u></u></div></div>
<div>
<div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal">On 23 October 2013 18:14, Smyth, Alec <<a href="mailto:Alec.Smyth@covisint.com" target="_blank">Alec.Smyth@covisint.com</a>> wrote:<u></u><u></u></div></div></div>
<blockquote style="BORDER-BOTTOM:medium none;BORDER-LEFT:#cccccc 1pt solid;PADDING-BOTTOM:0in;PADDING-LEFT:6pt;PADDING-RIGHT:0in;MARGIN-LEFT:4.8pt;BORDER-TOP:medium none;MARGIN-RIGHT:0in;BORDER-RIGHT:medium none;PADDING-TOP:0in">
<div>
<div>
<div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt">Hi James,</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt">OTS have done something clever. The OTS transducer has only two contacts, but the when you use the factory cable for mounting the transducer remotely you will notice the cable connector has three contacts. What they are doing is using two of them (#1 and #3) connected together to act as a switch, so that when you plug in the cable the OTS box turns on. I think if you keep your current arrangement, but also connect contacts 1 and 3, you might find it works.</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt">Best,<br><br>Alec</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Calibri','sans-serif';COLOR:#1f497d;FONT-SIZE:11pt"> </span><u></u><u></u></div>
<div>
<div style="BORDER-BOTTOM:medium none;BORDER-LEFT:medium none;PADDING-BOTTOM:0in;PADDING-LEFT:0in;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt solid;BORDER-RIGHT:medium none;PADDING-TOP:3pt">
<div style="FONT-SIZE:12pt" class="MsoNormal"><b><span style="FONT-FAMILY:'Tahoma','sans-serif';FONT-SIZE:10pt">From:</span></b><span style="FONT-FAMILY:'Tahoma','sans-serif';FONT-SIZE:10pt"> Personal_Submersibles [mailto:<a href="mailto:personal_submersibles-bounces@psubs.org" target="_blank">personal_submersibles-bounces@psubs.org</a>] <b>On Behalf Of </b>Emile van Essen<br>
<b>Sent:</b> Wednesday, October 23, 2013 12:34 PM<br><b>To:</b> 'Personal Submersibles General Discussion'<br><b>Subject:</b> Re: [PSUBS-MAILIST] OTS Issue</span><u></u><u></u></div></div></div>
<div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"> <u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="NL">James,</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="NL"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB">It usually gives no problem to cut a transducer cable and solder it again. Don’t forget the shield.</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB">Obvious, the transducer must be in water and may not be in the shade of the sub.</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB">Got mine on top of the sail. Best place but works not on surface..</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB">BTW; I am dealer of Ocean Reef UW Communication ; This brand share the same technology as OTS so you can talk between the 2 brands..)</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB">Best regards, Emile</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB">.</span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span style="FONT-FAMILY:'Arial','sans-serif';COLOR:navy;FONT-SIZE:10pt" lang="EN-GB"> </span><u></u><u></u></div>
<div>
<div style="TEXT-ALIGN:center;FONT-SIZE:12pt" class="MsoNormal" align="center"><span lang="NL">
<hr align="center" size="2" width="100%">
</span></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><b><span style="FONT-FAMILY:'Tahoma','sans-serif';FONT-SIZE:10pt" lang="NL">Van:</span></b><span style="FONT-FAMILY:'Tahoma','sans-serif';FONT-SIZE:10pt" lang="NL"> Personal_Submersibles [<a href="mailto:personal_submersibles-bounces@psubs.org" target="_blank">mailto:personal_submersibles-bounces@psubs.org</a>] <b>Namens </b>James Frankland<br>
<b>Verzonden:</b> woensdag 23 oktober 2013 18:05<br><b>Aan:</b> <a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a><br><b>Onderwerp:</b> [PSUBS-MAILIST] OTS Issue</span><u></u><u></u></div>
</div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">Hi All,</span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">Anyone got any thoughts on this.</span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">My OTS surface station mounted inside the sub didnt work. It didnt even switch on. I checked the Vout at the batteries (16x AAA inside the unit) and it was good at 12V.</span><u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">I suspect the problem is that i cut the transducer cable to pass it through a sub conn bulkhead connector. When you plus the transducer into the unit, that is supposed to turn it on at the same time, but nothing. Suspect no signal from the transducer so unit not switching on.</span><u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">You can see the rubbish effort i made of it here. Im almost sure this is the fault.</span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"><a href="http://www.guernseysubmarine.com/Extended_files/Page22133.htm" target="_blank">http://www.guernseysubmarine.com/Extended_files/Page22133.htm</a></span><u></u><u></u></div>
</div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">Anyone got any ideas? I need to get this fixed before the nest dive.</span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL"> </span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">Thanks</span><u></u><u></u></div></div>
<div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><span lang="NL">James</span><u></u><u></u></div></div></div></div></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal">_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></blockquote></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><br><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div></div>
<div style="MARGIN-BOTTOM:12pt;FONT-SIZE:12pt" class="MsoNormal"><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><u></u><u></u></div></div>
<div style="FONT-SIZE:12pt" class="MsoNormal"><u></u> <u></u></div></div></div></div>
<hr>
<div class="im">_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</div></div></blockquote></span></div><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
<br></blockquote></div><br>