[PSUBS-MAILIST] CO2 scrubber BOM or documentation

[Cliff Redus via Personal_Submersibles]

 Jon, see the attached drawing of the scrubber I will be using on the R400. It is essentially the same configuration I use on the R300.  I have had good luck with the Rapst RL90-18/24 Fan Blower.  These come up on eBay often.  You can get this used on eBay for $39 now.  These are good German-engineered blowers that seem to strike a balance between adequate head, and not to much current draw so that you can meet the 72-hour ABS rule and they are quiet.
System Papst RL90-18/24 Chassis Fan Blower | eBay

Cliff

    On Wednesday, March 20, 2024 at 01:21:01 PM CDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hey guys, I'm in the initial thought processes of CO2 scrubber design and really don't want to reinvent the wheel on this component.  Are any of you willing to share some details on your design?  I know Alec submitted a 3D printer design which we have on the website however I don't have access to a 3D printer and frankly even though I've spent 40+ years in software development and can modify a UNIX kernel, my CAD skills are pretty much non-existent.
For this component I'd really like something that can be built with as many off the shelf parts as possible.  Any suggestions?
Jon_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20240320/c1606d2a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: R400-D01-032.pdf
Type: application/pdf
Size: 2385618 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20240320/c1606d2a/attachment-0001.pdf>