[PSUBS-MAILIST] Welders

[via Personal_Submersibles]

Sean,

 

Most professionals do not use multiprocess machines. However, Stick welding option is included in most TIG machines.

I consider 220 Volt MIG/MAG machines as a bit too light for submersible work. Should have at least 250 Amps and can handle 1 mm wire to weld hull material.

 

BR, Emile

 

Van: Personal_Submersibles <personal_submersibles-bounces at psubs.org> Namens Sean T. Stevenson via Personal_Submersibles
Verzonden: zaterdag 29 juli 2023 19:10
Aan: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Onderwerp: [PSUBS-MAILIST] Welders

 

Curious to know what welding machines our members are using (those of you doing your own welds), and what your impressions are?

I am considering purchasing a Miller Multimatic 220 AC/DC machine, which will do GMAW (MIG), GTAW (TIG), and SMAW (stick). The unit is well reviewed, but pricy. Does anyone here have experience with these sorts of multiprocess machines?

Sean




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20230729/2d5c861e/attachment.html>