[PSUBS-MAILIST] Personal_Submersibles Digest, Vol 120, Issue 42

Thu Aug 17 17:28:09 EDT 2023

Hi Cliff, 
Thanks for that.  Glad to have you with us with an episode like that.  An
exciting day to say the least.  I have 2 valves on my VBT that can open to
either the pump or to sea water, so hopefully avoid slippage etc but the
human factor comes in.  Regards, Hugh

-----Original Message-----
From: Personal_Submersibles <personal_submersibles-bounces at psubs.org> On
Behalf Of via Personal_Submersibles
Sent: Thursday, August 17, 2023 3:29 PM
To: personal_submersibles at psubs.org
Subject: Personal_Submersibles Digest, Vol 120, Issue 42

Send Personal_Submersibles mailing list submissions to
	personal_submersibles at psubs.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles
or, via email, send a message with subject or body 'help' to
	personal_submersibles-request at psubs.org

You can reach the person managing the list at
	personal_submersibles-owner at psubs.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Personal_Submersibles digest..."

Today's Topics:

   1. Re: Personal_Submersibles Digest, Vol 120, Issue 40
      (Sean T. Stevenson via Personal_Submersibles)

----------------------------------------------------------------------

Message: 1
Date: Thu, 17 Aug 2023 03:28:06 +0000
From: "Sean T. Stevenson via Personal_Submersibles"
	<personal_submersibles at psubs.org>
To: personal_submersibles at psubs.org
Subject: Re: [PSUBS-MAILIST] Personal_Submersibles Digest, Vol 120,
	Issue 40
Message-ID:

<GyBprmKfDiOFylsJ2qdOuS5IH6y1apYuCeABTPumxnqUzor49UY7xwI7mlZWOrJj9u_eWcNwkPS
0k1h2l6FF-0ZPYkkoT1nFCerjm3fNByM=@protonmail.com>

Content-Type: text/plain; charset="utf-8"

I think

Sent from Proton Mail mobile

-------- Original Message --------
On Aug. 16, 2023, 21:18, Cliff Redus via Personal_Submersibles wrote:

> Hugh, I understand the attraction of using VBT for QSub. With a mission
profile to be able to do long ocean surface transects to a dive location,
submerge, dive, surface and then transect back. It is not practical to haul
excess ballast since the Qsub is operating more like a submarine than a
submersible. If you can find a positive displacement pump that does not have
a lot of slippage at your maximum depth, then the issue I mentioned about
opening the VBT at depth and getting negatively buoyant goes away because
the pump itself is preventing a large inrush of water. When this happened on
my boat, I had already switched to air for blowing VBT. I would, as you
note, adjust the water in the VBT just below the surface after flooding the
MBTs. This was the NOP but sometimes the unexpected happens and you need to
add buoyancy at depth with the VBT. I was diving the R300 about seven years
ago at Lake Amistad on the border between Mexico and Texas. I submerged to
about 150 ft in !
 old river bottom. When I lifted of the bottom to start the ascent using my
vertical thrusters at an altitude of about 10ft, the boat stopped ascending
even with full vertical thrusters. I was watching the depth gage and I was
just going up. I did not realize it but I was being dragged along by a
5-knot current and was not accenting at a rate I was comfortable with. The
boat at the time was neutrally buoyant. To increase the rate of ascent, I
decided to blow the VBT at depth. The depth was about 140 ft at the time.
When I opened the motorized ball valve on the vent side of the VBT, the boat
started descending even though air was being introduced because of this
sudden influx of water. Eventually, the water in the VBT was displaced with
air and the boat started to ascend. When I surfaced, I was about a mile
downstream from the tender vessel. Because the water visibly was so bad, I
did not realize I was being dragged by the current so much.
>
> Cliff
>
> On Wednesday, August 16, 2023 at 09:25:55 PM CDT, via
Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
> Hi Cliff,
> I am interested in your comments re the pump slippage etc and 
> operation of the VBTs when you were using them.
> My approach, untried and purely theoretical, was that most of the VBT 
> adjustment would be done just below the surface and only minor 
> adjustment for compression of vessels etc would be done at depth.
> I do appreciate that weight balance appears more foolproof. Regards, 
> Hugh
>
> -----Original Message-----
> From: Personal_Submersibles <personal_submersibles-bounces at psubs.org> 
> On Behalf Of via Personal_Submersibles
> Sent: Thursday, August 17, 2023 1:02 PM
> To: personal_submersibles at psubs.org
> Subject: Personal_Submersibles Digest, Vol 120, Issue 40
>
> Send Personal_Submersibles mailing list submissions to 
> personal_submersibles at psubs.org
>
> To subscribe or unsubscribe via the World Wide Web, visit 
> http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles
> or, via email, send a message with subject or body 'help' to 
> personal_submersibles-request at psubs.org
>
> You can reach the person managing the list at 
> personal_submersibles-owner at psubs.org
>
> When replying, please edit your Subject line so it is more specific 
> than
> "Re: Contents of Personal_Submersibles digest..."
>
> Today's Topics:
>
> 1. Re: Re VBT Pump (Cliff Redus via Personal_Submersibles)
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 17 Aug 2023 01:01:56 +0000 (UTC)
> From: Cliff Redus via Personal_Submersibles 
> <personal_submersibles at psubs.org>
> To: via Personal_Submersibles <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Re VBT Pump
> Message-ID: <2137621386.758356.1692234116222 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hugh, thanks for update on QSub.? I am looking forward to her dunk 
> test in your new test pool. I quite enjoyed sitting in her pressure 
> hull in your shop in New Zealand a few years back.? She will be quite 
> something when complete.
> Best
> On Wednesday, August 16, 2023 at 06:43:41 PM CDT, via 
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
> Thanks, Cliff, Alec, Vance, Jon.
>
> The model I was looking at, correction, was the Oberdorfer 994 which 
> is same as a 2000 series but 3/8" - 1/2"? and direct mounted not foot 
> mounted as per the 2000 series.
>
> The other pump I liked was the Wanner D10 which is diaphragm and can 
> do no slippage and 250 -300 psi etc but it is not bidirectional.? 
> However that can be fixed with valves.
>
> I am making some progress with my Q-Sub but made the mistake of going 
> too complex and trying to do everything.? I? have had issues with --- 
> 1. BMS systems for the LiFePO4 batteries and had to replace these.
> 2. Precharge systems for the 72 v and 144 volt electrics and voltage
spikes.
> 3. Gear cable kinking for the mercruiser sternlegs.
> 4. Inaccessible fuses and not motor rated.
> 5. Mechanical seal leakage on the hydraulics.
> 6. Joystick pot issues.
> 7. Canbus systems at different voltages.
> 8. Rotary sensors too coarse required op amp addition to amplify 
> signals for small rotary movements with steering.
> 9. Port Engine starting issues.
> 10. Oil compensation line fittings leaks.
> 11. Software issues.
>
> Still plugging along.? IN the meantime I have built a test pool 
> same-same Hank 8 ft deep 12 wide x 27 long, and another gantry crane 
> for PVHO removal, as well as a shed just for the sub.? This year it 
> has to be finished.? Has not even been in the pool yet!!
> Regards,? Hugh
>
> -----Original Message-----
> From: Personal_Submersibles <personal_submersibles-bounces at psubs.org> 
> On Behalf Of via Personal_Submersibles
> Sent: Thursday, August 17, 2023 3:21 AM
> To: personal_submersibles at psubs.org
> Subject: Personal_Submersibles Digest, Vol 120, Issue 36
>
> Send Personal_Submersibles mailing list submissions to ???
> personal_submersibles at psubs.org
>
> To subscribe or unsubscribe via the World Wide Web, visit ???
> http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles
> or, via email, send a message with subject or body 'help' to ???
> personal_submersibles-request at psubs.org
>
> You can reach the person managing the list at ???
> personal_submersibles-owner at psubs.org
>
> When replying, please edit your Subject line so it is more specific 
> than
> "Re: Contents of Personal_Submersibles digest..."
>
> Today's Topics:
>
> ? 1. Re: FW: VBT pump (Cliff Redus via Personal_Submersibles) ? 2. Re: FW:
> VBT pump (Alec Smyth via Personal_Submersibles) ? 3. Re: FW: VBT pump 
> (Jon Wallace via Personal_Submersibles)
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 16 Aug 2023 13:29:07 +0000 (UTC)
> From: Cliff Redus via Personal_Submersibles ???
> <personal_submersibles at psubs.org>
> To: via Personal_Submersibles <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] FW: VBT pump
> Message-ID: <536726240.403633.1692192547749 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hugh, on my original design for the R300 I had a hard VBT just aft of 
> the pilot. At the time I had a small HPU in the boat.? My plan was to 
> use a Oberdorfer Bronze gear pump driven by a small hydraulic motor to 
> move water in and out of the VBT.? I don't remember the specs on the 
> pump.? I had motorized ball valves on the vent and flood side of the 
> VBT.? Prior to using this set up, I did some testing of this gear pump 
> which I still have.? What I found was an unacceptable amount of flow
slippage at my max design depth.?
> There was so much slippage that the pump could not blow the VBT at max 
> depth.? At that point I abandoned using a pump and vent to blowing the 
> VBT with air.? I eventually abandoned the VBT altogether for 
> operability reasons.? When I used this hard VBT to get neutral on the 
> surface, the pressure in the tank was low.? When at depth if I ever 
> tried to use the VBT, water would rush in until the pressure equalized 
> with ambient water pressure.? This made the boat nega!
> tively buoyant until air was added.? The other thing that bugged me 
> was I had a float style level sensor in the VBT.? The water level in 
> the VBT was always moving around so you never trust the reading.? I 
> eventually abandoned the VBT and now just add ballast at the boat CG where
the VBT was located.?
> I find this works great.? The other issue is the VBT restricted access 
> to equipment aft of the VBT so to work on any of this equipment, I had 
> to remove the VBT.? ?All in all, I found the VBT to be a pain in butt.
> Cliff
> Oberdorfer 944 Bronze
>
> ? ? On Sunday, August 13, 2023 at 04:57:24 PM CDT, via 
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:?
>
> Hi Guys
>
> ?
>
> What make of pump is best for VBT water transfer in/out for 250 psi 1.5
kw.
>
> I am looking at a gear pump 1.5kw Oberdorfer 944 Bronze.? These are 
> only rated for 10 bar.? I tried an hydraulic gear pump 30cc where I 
> had a stainless and bronze gear set made up but the aluminium body 
> corroded form the trials and I just found that they had used steel backed
sleeve bearings.
>
> ?
>
> Regards,
>
> Hugh
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> ?
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL:
> <http://www.whoweb.com/pipermail/personal_submersibles/attachments/202
> 30816/
> b13a39c1/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 16 Aug 2023 09:41:53 -0400
> From: Alec Smyth via Personal_Submersibles ???
> <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion ???
> <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] FW: VBT pump
> Message-ID:
> ??? 
> <CABECYQ7JnW3k0Jz+wtvG64tx4pApp=vj5vkF9yWW2NN0fQMU3Q at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I second that (getting rid of VBT). I got rid of the VBT in my K250 
> years ago to make space and turn it into a 2-person and to try and to 
> simplify, and it worked so well I never thought of using any other 
> method on the current sub. The only difference with Cliff's method is 
> that I add or remove floats, while he uses ballast. But either way, 
> once you have a reference point for how much ballast/buoyancy you need 
> for a given crew weight, you just make incremental changes and it 
> never fails. You may be off neutral by just a few pounds, but if you 
> have vertical thrusters they're usually just ticking over at slow RPMs to
compensate.
>
> Best,
> Alec
>
> On Wed, Aug 16, 2023 at 9:30?AM Cliff Redus via Personal_Submersibles 
> < personal_submersibles at psubs.org> wrote:
>
>> Hugh, on my original design for the R300 I had a hard VBT just aft of 
>> the pilot. At the time I had a small HPU in the boat.? My plan was to 
>> use a Oberdorfer Bronze gear pump driven by a small hydraulic motor 
>> to move water in and out of the VBT.? I don't remember the specs on 
>> the pump.? I had motorized ball valves on the vent and flood side of 
>> the VBT.? Prior to using this set up, I did some testing of this gear 
>> pump which I still have.? What I found was an unacceptable amount of 
>> flow slippage at my max design depth.? There was so much slippage 
>> that the pump could not blow the VBT at max depth.? At that point I 
>> abandoned using a pump and vent to blowing the VBT with air.? I 
>> eventually abandoned the VBT altogether for operability reasons.? 
>> When I used this hard VBT to get neutral on the surface, the pressure 
>> in the tank was low.? When at depth if I ever tried to use the VBT, 
>> water would rush in until the pressure equalized with ambient water
pressure.?
>> This made the boat negatively buoyant until air was added.? The other 
>> thing that bugged me was I had a float style level sensor in the VBT.?
>> The water level in the VBT was always moving around so you never 
>> trust the reading.? I eventually abandoned the VBT and now just add 
>> ballast at the boat CG where the VBT was located.? I find this works
great.?
>> The
> other issue is the VBT restricted access to equipment aft of
>> the VBT so to work on any of this equipment, I had to remove the VBT.
> All
>> in all, I found the VBT to be a pain in butt.
>>
>> Cliff
>>
>> Oberdorfer 944 Bronze
>>
>> On Sunday, August 13, 2023 at 04:57:24 PM CDT, via 
>> Personal_Submersibles < personal_submersibles at psubs.org> wrote:
>>
>>
>> Hi Guys
>>
>>
>>
>> What make of pump is best for VBT water transfer in/out for 250 psi
>> 1.5
> kw.
>>
>> I am looking at a gear pump 1.5kw Oberdorfer 944 Bronze.? These are 
>> only rated for 10 bar.? I tried an hydraulic gear pump 30cc where I 
>> had a stainless and bronze gear set made up but the aluminium body 
>> corroded form the trials and I just found that they had used steel 
>> backed
> sleeve bearings.
>>
>>
>>
>> Regards,
>>
>> Hugh
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL:
> <http://www.whoweb.com/pipermail/personal_submersibles/attachments/202
> 30816/
> b5338913/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 16 Aug 2023 15:20:44 +0000 (UTC)
> From: Jon Wallace via Personal_Submersibles ???
> <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion ???
> <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] FW: VBT pump
> Message-ID: <1959084270.469930.1692199244774 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> I'll chime in here...I removed the VBT from the K600 because it was 
> fairly well rusted inside and needed to be replaced, however I am 
> planning on using the ballast/float method instead and forgoing the 
> VBT altogether for many of the reasons Alec and Cliff cited.? I will 
> say that it can be challenging to change ballast on-station since the 
> weight/floatation has to be transferred somewhere and by somebody, 
> however I see the K600 being trimmed for specific missions prior to 
> launch and not being trimmed dynamically on-station to embark/disembark
passengers or equipment.
> Jon
>
> ? ? On Wednesday, August 16, 2023 at 09:43:35 AM EDT, Alec Smyth via 
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:?
>
> I second that (getting rid of VBT). I got rid of the VBT in my K250 
> years ago to make space and turn it into a 2-person and to try and to 
> simplify,?and it worked so well I never thought of using?any other 
> method on the current sub. The only difference with Cliff's method is 
> that I add or remove floats, while he uses ballast. But either way, 
> once you have a reference point for how much ballast/buoyancy you need 
> for a given crew weight, you just make incremental changes and it 
> never fails. You may be off neutral by just a few pounds, but if you 
> have vertical thrusters they're usually just ticking over at slow RPMs to
compensate.
>
> Best,Alec
> On Wed, Aug 16, 2023 at 9:30?AM Cliff Redus via Personal_Submersibles 
> <personal_submersibles at psubs.org> wrote:
>
> Hugh, on my original design for the R300 I had a hard VBT just aft of 
> the pilot. At the time I had a small HPU in the boat.? My plan was to 
> use a Oberdorfer Bronze gear pump driven by a small hydraulic motor to 
> move water in and out of the VBT.? I don't remember the specs on the 
> pump.? I had motorized ball valves on the vent and flood side of the 
> VBT.? Prior to using this set up, I did some testing of this gear pump 
> which I still have.? What I found was an unacceptable amount of flow
slippage at my max design depth.?
> There was so much slippage that the pump could not blow the VBT at max 
> depth.? At that point I abandoned using a pump and vent to blowing the 
> VBT with air.? I eventually abandoned the VBT altogether for 
> operability reasons.? When I used this hard VBT to get neutral on the 
> surface, the pressure in the tank was low.? When at depth if I ever 
> tried to use the VBT, water would rush in until the pressure equalized 
> with ambient water pressure.? This made the boat nega!
> tively buoyant until air was added.? The other thing that bugged me 
> was I had a float style level sensor in the VBT.? The water level in 
> the VBT was always moving around so you never trust the reading.? I 
> eventually abandoned the VBT and now just add ballast at the boat CG where
the VBT was located.?
> I find this works great.? The other issue is the VBT restricted access 
> to equipment aft of the VBT so to work on any of this equipment, I had 
> to remove the VBT.? ?All in all, I found the VBT to be a pain in butt.
> Cliff
> Oberdorfer 944 Bronze
>
> ? ? On Sunday, August 13, 2023 at 04:57:24 PM CDT, via 
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:?
>
> Hi Guys
>
> ?
>
> What make of pump is best for VBT water transfer in/out for 250 psi 1.5
kw.
>
> I am looking at a gear pump 1.5kw Oberdorfer 944 Bronze.? These are 
> only rated for 10 bar.? I tried an hydraulic gear pump 30cc where I 
> had a stainless and bronze gear set made up but the aluminium body 
> corroded form the trials and I just found that they had used steel backed
sleeve bearings.
>
> ?
>
> Regards,
>
> Hugh
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> ? _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> ?
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL:
> <http://www.whoweb.com/pipermail/personal_submersibles/attachments/202
> 30816/
> 301b6d76/attachment.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles
>
> ------------------------------
>
> End of Personal_Submersibles Digest, Vol 120, Issue 36
> ******************************************************
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL:
> <http://www.whoweb.com/pipermail/personal_submersibles/attachments/202
> 30817/
> b598be5b/attachment.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles
>
> ------------------------------
>
> End of Personal_Submersibles Digest, Vol 120, Issue 40
> ******************************************************
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.whoweb.com/pipermail/personal_submersibles/attachments/20230817/
be32aa1c/attachment.html>

------------------------------

Subject: Digest Footer

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles

------------------------------

End of Personal_Submersibles Digest, Vol 120, Issue 42
******************************************************