[PSUBS-MAILIST] air compensation

Bernie Hellstrom via Personal_Submersibles personal_submersibles at psubs.org
Thu Aug 3 18:13:07 EDT 2023


David
  Yes inside or outside in the water it can freeze too. Environmental kits take this out of the equation.

Sent from my iPhone

On Aug 3, 2023, at 5:29 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Bernie, so the moisture in the sub where my regulator is located may have been cooling the high humidity moisture in the sub. I hadn't thought of that. Would the cooling effect be the same on both the HP and LP ports. I am considering adding two HP air tanks externally within the lower aft clam shell of the VAST. Being exposed to the water, so the cooling effect would be mitigated by the water mass would eliminate a possible freeze condition? or do I need to add vodka?

Best Regards,
David Colombo
[http://static.squarespace.com/static/533310a9e4b0fba62008a464/t/5339c1f2e4b041bac4e25d1b/1396294132055/?format=500w]
804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com<http://www.SeaQuestor.com>



On Thu, Aug 3, 2023 at 12:26 PM Alan James via Personal_Submersibles <personal_submersibles at psubs.org<mailto:personal_submersibles at psubs.org>> wrote:
Thanks David,
that looks a good price.
Cliff and I were looking at the Caroute brushless motor lower unit, 36V 160lb thrust. Cost US $1200 to get to Texas.
The big problem was that they had the motor driver in the thruster housing and this had 2 large capacitors in it.
These would crush if we equalised the inside of the thruster.
Also you can have long leads from the motor controller to the motor but if you have long leads from the battery to the motor controller it is problematic. So by putting the controller in the thruster they are making the battery leads longer.
They are bringing out a model with an external motor controller next year.
With regard to the brushless Minn Kotta; most brushless motors have 3 wires coming from them, unless they have a hall sensor board or temperature sensor. These can be controlled with a Vesc motor controller & tuned in it's open source program.
Alan



Sent from Yahoo Mail on Android<https://mail.onelink.me/107872968?pid=nativeplacement&c=Global_Acquisition_YMktg_315_Internal_EmailSignature&af_sub1=Acquisition&af_sub2=Global_YMktg&af_sub3=&af_sub4=100000604&af_sub5=EmailSignature__Static_>

On Thu, 3 Aug 2023 at 2:15 pm, David Colombo via Personal_Submersibles
<personal_submersibles at psubs.org<mailto:personal_submersibles at psubs.org>> wrote:
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org<mailto:Personal_Submersibles at psubs.org>
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org<mailto:Personal_Submersibles at psubs.org>
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20230803/29b0c580/attachment-0001.html>


More information about the Personal_Submersibles mailing list