[PSUBS-MAILIST] K-sub hatch o-ring

[James Frankland via Personal_Submersibles]

Hi Jon,

Do you have the info you need on the K-350 hatch dimentions?   I can
measure mine this weekend if required, i just missed the email threads on
this one, but happy to assist with any requests if need be.

Regards
James



On Thu, 10 Jun 2021 at 01:53, Rick Patton via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Jon
> I’ll be home in a couple of hours and I’ll let you know.
>
> Rick
>
> Sent from my iPhone
>
> On Jun 9, 2021, at 9:21 AM, Jon Wallace via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> 
> Can someone with a K-350 measure the ID of the hatch o-ring channel and
> report back on it?  The K350 plans specify a 2-471 O-ring which has an ID
> of 21.995 inches but I'm measuring an ID of 23.25 on the K600 and I'm
> thinking the K350 also has an ID of 23.25.  That would seem like a bit of a
> "stretch" installing the 2-471.
>
> There's a 2-472 O-ring that has an ID of 22.995 inches which would require
> less stretching, but...???
>
> Will post on FB as well.
>
> Jon
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20210610/e19cf911/attachment.html>