[PSUBS-MAILIST] Speed and Direction Control for Small Brushed Motors

Jon Wallace via Personal_Submersibles personal_submersibles at psubs.org
Fri Jul 9 09:35:34 EDT 2021


 I've thought about that as well but haven't got there yet.  A simple potentiometer connected to the rudder would be enough to give feedback regarding its position if I can come up with a way of waterproofing it.  I recall Alan trying to deal with this years ago and not sure if he did find a solution or not.  In terms of returning to center position, just not there yet.  If anyone has suggestions, I'm open.
Jon

    On Friday, July 9, 2021, 09:11:47 AM EDT, Cliff Redus via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
  Nice work Jon; well documented and helpful.  I have found that to make fly by wire work for control surfaces, you need a position sensor and/or  have the ability for the control surface to return to a neutral position through the joystick sending out a centralized position signal.  What are you planning to use on your boat for rudder feedback?
Thanks for this excellent contribution to site.
Cliff 
    On Thursday, July 8, 2021, 11:07:50 PM CDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 For a couple of weeks I've been toying with the idea of a "fly-by-wire" approach to rudder control.  I really don't like the idea of manually operated foot control found in K-subs and while thinking about how I might implement a hand control I started delving into a fly-by-wire solution after seeing a youtube video on a totally unrelated topic demonstrating small motor controllers.
I've converted a 5 volt hand-held power screwdriver into a 1-ATM housing partially filled with oil for lubrication purposes.  The torque on these small things are quite impressive and I believe may be strong enough to handle a rudder.  Even if it isn't, I can still use the motor for something else.
I combined a small motor controller that can handle 10 amps, with a TEENSY microprocessor, and a joystick which allows me to control motor spin direction, and speed.  It works amazing and total cost was about $60.  If you've got a purpose for a small electric motor with speed/direction control, you might find this project interesting.  I've written a paper and also included software, both available at PSUBS.ORG > PSUBS Community > Community Projects > Speed and Direction Control for Small Brushed Motors.
Direct link:http://www.psubs.org/community/projects/moto-1.pdf


Jon_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20210709/3f669de6/attachment-0001.html>


More information about the Personal_Submersibles mailing list