[PSUBS-MAILIST] Manipulator

[hank pronk via Personal_Submersibles]

 Alan, we have to use a speed control with 12V because they are too fast, or at least fast enough.  They are also plenty powerful, even at half speed.Hank
    On Friday, February 5, 2021, 07:21:18 PM MST, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Just had a look at the BOM for the Psub manipulator & it specifies a 12V Lenco actuator. Notice that they have a 24V version as well. Wouldn't this be better if it was available? Twice the power or speed.Alan _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20210206/491dcc49/attachment.html>