[PSUBS-MAILIST] paint coatings

[Rick Patton via Personal_Submersibles]

Thanks Jon, I'll check to see what I have written down and if I mis quoted
it to them.
Rick

On Sat, May 2, 2020 at 6:52 AM T Novak via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Hank,
>
> Tremclad, or the equivalent, on fiberglass? Now that's interesting.  No
> reason not to I would think.  Brilliant, actually.  Glossy spray bomb… love
> it.
>
> Tim
>
>
>
> *From:* Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org] *On Behalf Of *hank pronk via
> Personal_Submersibles
> *Sent:* Saturday, May 2, 2020 4:38 AM
> *To:* Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *Subject:* Re: [PSUBS-MAILIST] paint coatings
>
>
>
> Rick, I use hardware store rust paint.  I dive in lakes and the sub does
> not stay in the water very long.  Never had a problem.
>
> Hank
>
>
>
> On Friday, May 1, 2020, 7:47:32 PM MDT, Rick Patton via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
>
>
>
> Thanks Brian, I'll give them a call tomorrow and check into it. Hank,
> didn't you just post that you are having your sub painted after doing the
> glass work? What did you use?
>
> Rick
>
>
>
>
>
> On Fri, May 1, 2020 at 3:39 PM Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> I use Pro Line in Long Beach, CA exclusively .   I use the epoxy 3000
> barrier coat primer, and then the 4800 Linear Polyurethane .
>
>
>
> Brian Cox
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: psubs chat room <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] paint coatings
> Date: Fri, 1 May 2020 10:44:21 -1000
>
> I have done some checking into different paint systems and wanted to share
> that with the group.
>
> Jon had set up a psubs discount with Sherwin-Williams a while ago and gave
> us a contact name and phone number if our local outlet had any problems. I
> had seen that a couple of you had used the macropoxy 650 system so I asked
> our local outlet about it and they showed me the only color chips that it
> came in. also asked them if it was possible to mix in a metal flake and
> they said no so I called the contact name I was given and the guy who
> answered said that he took ricks place. I ran everything by him and he
> asked Rick about it and Rick said that he didn't remember suggesting the
> macropoxy 650 as the best application for what we were doing but said that
> it could be tinted any color and are checking on weather the 650 is the
> best way to go for our application and weather a metallic can be added.
> Will post results when I get them.
>
>
>
> Rick
>
>
>
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200502/319a9090/attachment.html>