[PSUBS-MAILIST] metric to standard

[Rick Patton via Personal_Submersibles]

Alan

I am going to fab a test chamber and check and will post the results and
yes I plan on putting a fitting on both sides of all threw hulls.
Thanks for the tip Steve
Rick

On Fri, Jun 12, 2020 at 7:08 AM Steve McQueen via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Try Titan Fittings. It might take combining 2 fittings to get there.
> Steve
>
> On Fri, Jun 12, 2020 at 12:26 AM Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> Maybe I'll just weld one onto another one.  ;-)
>>
>> --- personal_submersibles at psubs.org wrote:
>>
>> From: Brian Cox via Personal_Submersibles <
>> personal_submersibles at psubs.org>
>> To: "PSubs " <personal_submersibles at psubs.org>
>> Subject: [PSUBS-MAILIST] metric to standard
>> Date: Thu, 11 Jun 2020 15:02:15 -0700
>>
>> All,
>>                    Is it possible to get a metric to stainless pipe
>> thread coupling ?        Seems Blue globe is the only cable gland option.
>>
>> Brian
>>
>>
>> _______________________________________________ Personal_Submersibles
>> mailing list Personal_Submersibles at psubs.org
>> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200612/bbd10426/attachment-0001.html>