[PSUBS-MAILIST] cable fittings

[Rick Patton via Personal_Submersibles]

Thanks Hank, I have reached out to a couple of vendors that some of you had
mentioned and am waiting back from one that says they can handle the higher
than 15 bar standard rating.
Has the Ice thawed in the lakes up there yet so you can start
wearing shorts and a T shirt?
Rick

On Mon, Jun 8, 2020 at 11:12 AM hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Rick, I just realized that the original lights on Gamma had a brass
> compression fitting for the power wire.  So it can be done and was a 1,000
> foot sub.
> Hank
>
> On Monday, June 8, 2020, 3:02:30 PM MDT, Rick Patton via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> I don't have a facebook account though my wife does so I guess I would
> need to use her account to access the Psub page? Good luck on your
> progress.
> Rick
>
> On Mon, Jun 8, 2020 at 10:27 AM Steve McQueen via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Rick, my project is going well. but slow. I am in the "systems testing"
> phase with a few build items left. I have been posting mostly on the
> Facebook Psub page because I found posting pictures was a lot easier.
> However, I left Facebook the other day so I am back to this platform.
>
> Steve
>
> On Mon, Jun 8, 2020 at 4:02 PM Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Sorry guys for re asking about the fastener but I knew there were a lot
> more of you out there that hadn't chimed in yet with good input! Though I
> won't see more than around 170 psi, I need the extra rating for the 600'
> test dip.
> Rick
>
> On Mon, Jun 8, 2020 at 9:13 AM Sean T. Stevenson via Personal_Submersibles
> <personal_submersibles at psubs.org> wrote:
>
> I use Conax fittings routinely in industrial applications to many tens of
> thousands of psi in some cases, and they perform as advertised.
>
> Make sure you're sitting down when you read the price quote though.
>
> Sean
>
>
> -------- Original Message --------
> On Jun. 8, 2020, 10:22, Steve McQueen via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Sorry, Conax not Cona. Try this link:  https://www.conaxtechnologies.com/
>
> On Mon, Jun 8, 2020 at 12:21 PM Steve McQueen <psub101 at indy.rr.com> wrote:
>
> Hi Rick, Besides Blue Globe I am using a product from a company
> called Cona. www.conax.com. I am using part number PG5-500-A-N. It is
> untested but hopefully will work. It works on paper anyway : )
>
> Steve
>
> On Mon, Jun 8, 2020 at 12:09 PM Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> I posted the other day about cable threw hull water tight fittings and
> only got one response back and was hoping for more feed back as I know most
> of you probably don't make your own so for the ones that buy them, is Blue
> Globe the only player out there besides sealcon?
> Thanks
> Rick
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200608/0b98051e/attachment.html>