[PSUBS-MAILIST] (no subject)

[Rick Patton via Personal_Submersibles]

Hank
I originally gave the job to a guy who does glass work for a living along
with my Styrofoam mold that I had spent many many hours fairing out and he
failed to use a mold release that was for Styrofoam and ended up having to
pick the Styrofoam mold out piece by piece so he was not able to use it to
make the second tank and he for some reason had only laid up two layers of
glass before wrecking the mold so I went and got it from him and will
finish them myself. I have worked with glass before but don't enjoy it. I
might take them to a body shop here to have them do a gel coat so they look
pretty. Hard to find good help on this Island!
Rick

On Fri, Jan 24, 2020 at 12:33 PM T Novak via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hank,
>
> In notice that you have the thruster horizontal.  I find them to be very
> tail heavy... are you counterbalancing them in this position or just taking
> up vertical rotation tendency with a tight joint?
>
> Tim
>
> -----Original Message-----
> From: Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org]
> On Behalf Of hank pronk via Personal_Submersibles
> Sent: Friday, January 24, 2020 1:21 PM
> To: Personal Submersibles General Discussion
> <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] (no subject)
>
> Jon. Here is a picture that shows my solenoid valve inside an oil filled
> enclosure behind the sail. The enclosure is a rubber plumbing boot Hank
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200124/be4e4bed/attachment-0001.html>