[PSUBS-MAILIST] Scuba Tank Purchase Questions

[T Novak via Personal_Submersibles]

Just a case in point about DIN versus yoke, during the Flathead Lake expedition we blew two yoke O-rings on the Gama scuba tanks. It goes without saying that spare O-rings are a necessary inventory item to have on hand during sub ops.

Tim

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Cliff Redus via Personal_Submersibles
Sent: Thursday, February 20, 2020 10:25 AM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Scuba Tank Purchase Questions

 

Mine are aluminum for primary and I have a composite tank internal as a backup HP source.

 

With a name like yours, you could not find a better boat name.

 

Cliff 

Sent from my iPhone





On Feb 20, 2020, at 10:57 AM, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote:



Cliff, thanks. Good to hear about actual field issues. I will reconsider my thoughts a.ccordingly.  I have completed my contribution for Pisces VI and have refocused on finishing my project. Having your own compressor is a nice advantage. Are your MBT HP tanks aluminum or steel?

 

 My K-250 is named "The Great Escape" (get it?).

 

Steve

 

 

 

 

 

 

On Thu, Feb 20, 2020 at 11:36 AM Cliff Redus via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote:

Steve, if it were me, I would go with DIN fitting on scuba tanks.  About 2 years after I built my boat I had an O-ring blow while I was on the boat ramp ready to launch. If this would have happened during a dive, I would not have been unable to blow my MBTs by myself.  I would have had to have divers to manually inflate my MBT with open vent ports.  My experience is that most scuba shops can fill scuba tanks with DIN connections.  After the incident, I switched my MBT HP air supply to DIN values and have never had any trouble since then.  Also, last year I purchased a portable scuba compressor that came with an adapter to let you fill Yoke or DIN valves.  Also this compressor is capable of filling a steel HP tank if I want to.  To me, the real benefit of steel tanks with DIN connections is the ability to fill to a higher pressure.  If you don't need the higher pressure, then aluminum are lower cost.

 

We are all looking forward to your sea trials for your lime green K250.  I love the paint job on your boat.  Has she got a name yet?  I am surprised you have had any time to work on your boat with the PLC work you been doing for Scott on his Pieces 6.

 

Looking forward to catching up with you this year at one of the psub events.

 

Best

 

 

 

On Thursday, February 20, 2020, 09:54:59 AM CST, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote: 

 

 

All, getting ready to buy 2 scuba tanks for my K250. Just wanted to see if anyone had an opinion of my thoughts?

 

1) Choosing steel vs. aluminum (prefer its weight/buoyancy characteristics)

2) While I was wanting as much air volume as possible I decided against a HP version as I have heard most places won't (can't?) fill to that capacity anyway

3) Deciding on standard pressure steel 80s with K-valve (yoke fitting)

 

I've been watching for a while (including Black Friday) but it seems there isn't much mark up and these tanks don't appear to go on sale.

 

Thanks,

Steve

 

 

 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200220/6825d47b/attachment.html>