[PSUBS-MAILIST] Scrubber size

[David Colombo via Personal_Submersibles]

Brian, Corrosive to the SS mesh shell?

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com



On Mon, Dec 14, 2020 at 4:49 PM Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> David,    And that material is corrosive.
>
> Brian
>
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Scrubber size
> Date: Mon, 14 Dec 2020 16:36:29 -0800
>
> Steve thanks for the advice. It could get messy in a change out. I could
> practice while sitting in the sub for the 12 hr test. (my wife says to me
> what are you going to do for 12 hours?)
> I just shrugged my shoulders?
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com
>
>
>
> On Mon, Dec 14, 2020 at 6:41 AM Steve McQueen via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Dave, From a design standpoint I went with the wasteful media approach. I
> don't see myself diving often enough to worry about the waste. I made my
> scrubber volume as large as the installation footprint allowed. I didn't
> want to worry about changing the media anymore than needed. It still ended
> up being a trade off as I think I have to change my media out once or twice
> to have 72 hour capacity.
>
> However you do it imagine changing the media while sitting in the sub.
>
> Steve
>
>
>
> On Sun, Dec 13, 2020 at 10:14 PM David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Hi Guys, I was following Jon's thread and thought how appropriate.  I am
> building a scrubber for the VAST sub. The housing I acquired was a carbon
> filter used in the grow industry.  With an interior screen core for the air
> to flow thru to the sodasorb core to the outside screen. The volume of this
> space holds 3.6 lbs of carbon. Not sure if the weight per volume of the
> sodasorb is exactly the same, but if it is that chamber would produce about
> 14.4 hours of absorption. I'm am thinking that I am going to cut the unit
> in half. My thinking is that for a typical day of diving, 14 hrs seem a bit
> excessive and I would be wasting  a lot of sorb.  With pre packaged,
> vacuumed bags I can carry what would be required to meet ABS guidelines.
> One of my concerns though is that with the compactness of the VAST sub with
> a reduced volume of sorb, would the heat generated be greater than with
> more sorb, thereby also increasing the humidity buildup.
> I am hoping to get some experience feedback from other small owners, and
> what they have used volume wise of the sorb for a typical day of diving.
> The co2 unit I am using measures humidity as well as co2 ppm.
> Attached are pictures of the unit ready to have the fan attached.
> Best Regards,
> David Colombo
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20201214/3cb3d049/attachment-0001.html>