[PSUBS-MAILIST] Altimeter / barometer/ inclinometer

[Alec Smyth via Personal_Submersibles]

David,

That’s good looking, but I might misunderstand what you propose doing. The faceplate I’ve been passing around is for the Altimaster 2, so probably there’s a scale mismatch as this is a different instrument. Also, once you close the hatch you won’t be seeing barometric pressure but cabin pressure. I’m sure I’ve misunderstood...

Best,
Alec



> On Apr 21, 2020, at 7:05 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Hi guys, just got my altimeter for the SeaQuestor, which has a built in inclinometer. The dial face can rotate for altitude variance for diving at sea level or lake tahoe(elev 6225ft). The dial face can be set to determine if the barometric pressure is rising or falling. I am thinking to add Alex Smyth's label to be located between the altitude  and the orange  dial. Any thoughts about this? 
> David.
> <Image1188092987416026962.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles