[PSUBS-MAILIST] new dome for E3000

[Hugh Fulton via Personal_Submersibles]

What is the facebook address?  I love innovation.

Thanks, Hugh

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of hank pronk via Personal_Submersibles
Sent: Monday, 21 October 2019 12:07 PM
To: Hugh Fulton via Personal_Submersibles
Subject: Re: [PSUBS-MAILIST] new dome for E3000

 

Hugh, 

The short answer is NO. If I think I can do it, I will try.    I posed a short video of the radius cutter working on Face Book.  I don't have any assembled pictures of the Radius cutter and it has to be disassembled to remove it from the lathe.  It's just a giant ball turner with an electric actuator with speed control.

Thank you for the kind words.

Hank

 

On Sunday, October 20, 2019, 1:59:26 PM MDT, Hugh Fulton via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 

 

 

Hank, 

Is there anything that you won’t tackle?  You never cease to amaze me.  Have you got a photo somewhere of your turning mechanism for getting the radius?

I paid about $10,000 each for mine to be done but they did get Lloyd certs.   

Hugh

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of hank pronk via Personal_Submersibles
Sent: Monday, 21 October 2019 6:21 AM
To: Personal Submersibles General Discussion
Subject: [PSUBS-MAILIST] new dome for E3000

 

Mission accomplished, my dome is out of the lathe and ready for machine polishing.  Many thanks to River for helping with drawings and design.  

After polishing it will go into the oven for annealing.  I am making some small modifications to the oven based on conversations with experts in the field.

Hank

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20191021/c4849e06/attachment.html>