[PSUBS-MAILIST] new dome for E3000

[Hugh Fulton via Personal_Submersibles]

Hank, 

Is there anything that you won’t tackle?  You never cease to amaze me.  Have you got a photo somewhere of your turning mechanism for getting the radius?

I paid about $10,000 each for mine to be done but they did get Lloyd certs.   

Hugh

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of hank pronk via Personal_Submersibles
Sent: Monday, 21 October 2019 6:21 AM
To: Personal Submersibles General Discussion
Subject: [PSUBS-MAILIST] new dome for E3000

 

Mission accomplished, my dome is out of the lathe and ready for machine polishing.  Many thanks to River for helping with drawings and design.  

After polishing it will go into the oven for annealing.  I am making some small modifications to the oven based on conversations with experts in the field.

Hank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20191021/2f3a2e19/attachment.html>