[PSUBS-MAILIST] Rib attachments

[Jon Wallace via Personal_Submersibles]

Hi Alec, I’m guessing those have a 1/4 inch slot.  My rings are 3/8.  I may have to fabricate something similar. 


--------------------------------------------
On Sat, 5/4/19, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Rib attachments
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Date: Saturday, May 4, 2019, 10:54 AM
 
 Hi Jon,
 
 These little things can be found at hardware
 stores and clamp to the stiffener flanges to attach light
 things. Replace the set screw with a SS one.
 
 https://www.lowes.com/pd/Gatehouse-Sliding-Patio-Door-Cylinder-Lock/3410472
 
 Best,
 Alec
 
 > On May 4, 2019, at 9:05
 AM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 > 
 > Curious
 what folks are using to attach instruments and hardware to
 reinforcement rings without drilling or welding.   I see
 Steve has created some metal hangers that I assume have
 slots cut in the end to grab onto the flange of the rib. 
 Any other ways?  
 >
 _______________________________________________
 > Personal_Submersibles mailing list
 > Personal_Submersibles at psubs.org
 > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles